Board Logo

Angleflow Heads 4"
55slug - April 25th, 2013 at 02:11 PM

Hi,
I know this isnt the FS section but its a small market.

These are in the US at the moment, Jeff Denham ported heads, 52 x 40 valves, 4" bore, six stud. New never used, they cost me 3k US, looking for offers around there somewhere ? Freight included in that price.

I bought a complete longblock so dont need these. Would consider swaps or other offers also.

I also have a line on a matching case (Denham) and 90mm flanged crank and flywheel, 5.7" rods (probably a bit short) for another 3k if it helps.
Thanks
Adrian

mike64 - April 26th, 2013 at 10:44 PM

Hey Adrian, we were talking about Angelflow's a while back, what case is it he used? and what brand of crank?

55slug - April 27th, 2013 at 10:34 AM

Quote:
Originally posted by mike64
Hey Adrian, we were talking about Angelflow's a while back, what case is it he used? and what brand of crank?


CB case undrilled, welds on it a bit, bores for 4" and six studs it ( WBX pattern). Case has had the centre main thrust conversion by jaycee, Crank is a Scat.

mike64 - April 27th, 2013 at 10:11 PM

Good price when you add up the part's.