Board Logo

My 2442
airkewld - August 16th, 2009 at 08:21 PM

Hey guys just thought id let you know how my ride is coming along. Originally I was running N/A IDA set up but decided to convert to EFI for better streetability. There is still some minor tinkering left but am very happy with the end result of 199.8 ATW with Air Filters, belt and exhaust on. :dork:

dangerous - August 17th, 2009 at 05:19 AM

WHAT!

No pictures!!!!!???????

matberry - August 17th, 2009 at 09:40 AM

C'mon............you gotta show us

polak - August 17th, 2009 at 11:27 AM

thats a pretty solid power figure!! are you bringing it to warwick? pics would be great too :smilegrin:

Mick058 - August 17th, 2009 at 11:43 AM

what kind of box are you running with that power?

chunks54 - August 17th, 2009 at 06:55 PM

Thats a good output! What are the specs? What EFI setup are you running?

Sounds cool, and to echo what everyonie else has said.... PICTURES PLEASE!

airkewld - August 18th, 2009 at 09:13 PM

Thanks for the positive replies... Not sure if we will make it to warwick but will definately try... I havn had a chance to take photos yet but as soon as i do i will post them... Some specs.. 2442, 48 x 40 comp eliminators, pauter rockers, 50mm TB's, Microtech ECU...

airkewld - September 12th, 2009 at 03:12 PM

I finally got around to taking some photos of the new setup. . . Hope you guys like it . . . I am extremely happy ... Thanks again to mike and the team at cbb for an awesome job.

airkewld - September 12th, 2009 at 03:16 PM

pic 2

airkewld - September 12th, 2009 at 03:17 PM

pic 3

Craig Torrens - September 12th, 2009 at 08:36 PM

I'm thinking of running mine at WSID, do you want to come one Wednesday night to stir up some trouble ??

dangerous - September 12th, 2009 at 10:59 PM

Looking great!
How much power now with the smaller pulley I see.

airkewld - September 13th, 2009 at 01:15 AM

There was a compatibility issue with the coil and the ECU so a change was made and final dyno/tuning will be completed early next week. Would love to hit the track if it is ready. Dave do you think there will be any gain in power with the smaller pulley?

airkewld - September 14th, 2009 at 02:28 PM

another pic

matberry - September 14th, 2009 at 03:35 PM

Well done. Engine looks great, and those numbers say she'll go alright too :-).

p.s. I'd say yep on the power increase with the smaller pulley.

chunks54 - September 15th, 2009 at 08:00 PM

Great setup! What fuel are you running? Do you guys get E85 at many places down under? Its starting to become available more commonly over here in the UK, and with the easy tunability of EFI a number of guys are making the switch and picking up some power....

airkewld - September 16th, 2009 at 01:24 PM

Cheers to all for the positive comments ...We are just using a premium high octane pump fuel ... as far as i know E85 has already become readily available over here ... Am looking very forward to hitting the track most likely next week to see what numbers it will run..