Board Logo

WTB 5x130 brakes for 1970 beetle
turboty - January 28th, 2013 at 03:21 PM

[size=4]hey guys...
i am looking for a full set of disks and drums with a 5x130 for my 1970 bug...

thought i would see if anyone had something i could use before going shopping... you know... keeping the cash in the vw community..

thanks[/size]


1916baja - January 28th, 2013 at 06:38 PM

My 1970 bug is 4x130...


bugzla - January 28th, 2013 at 06:48 PM

turboty let me know how you go cause im looking for the same maybe a discount could be had if we buy 2 sets


bigrudi - January 29th, 2013 at 05:49 PM

Ive got a set as new with near new shoes for rear and new wheel bearings and seals on drilled front discs where are u located give me a call im in sydney 0418442953


bugzla - January 29th, 2013 at 10:55 PM

hey rudi

if he doesnt take them id be interested in the pending price and wether you would be interested to send it to townsville


hellbugged - January 30th, 2013 at 05:21 PM

http://forums.aussieveedubbers.com/viewtopic.php?tid=100492 


type_one - January 31st, 2013 at 06:59 AM

Mine if you are interested. Not complete though. I might be able to find some calipers in the shed too.

http://www.gumtree.com.au/s-ad/merrylands/other-parts-accessories/vw-four-stud-front-discs-/1013278735


Sides - January 31st, 2013 at 07:58 AM

He's after 5x130 dude, as in 5 studs.... the ones you're selling are 4 stud (ie 4x130).


ragged - February 4th, 2013 at 09:28 PM

What about these? $150 the pair...They are for ball joint, not link pin as advertised.

http://www.gumtree.com.au/s-ad/merrylands/other-parts-accessories/vw-a-pair-o...


turboty - February 9th, 2013 at 09:18 AM

Quote:
Originally posted by ragged
What about these? $150 the pair...They are for ball joint, not link pin as advertised.

http://www.gumtree.com.au/s-ad/merrylands/other-parts-accessories/vw-a-pair-o...


will these fit my 1970 bug??


ragged - February 9th, 2013 at 10:53 AM

Yes they will fit. The measurements he supplied are at where the seal and dust cap fit. They are to suit ball joint not link pin. If they were link pin style I would have bought them myself.


turboty - February 11th, 2013 at 09:38 PM

Quote:
Originally posted by ragged
Yes they will fit. The measurements he supplied are at where the seal and dust cap fit. They are to suit ball joint not link pin. If they were link pin style I would have bought them myself.


So as a green horn... is there an easy way to see if it is link pin or ball joint? Also any ideas on what I can do with the rears?