Aussieveedubbers - Powered by GaiaBB

Late model dual port motor for mocking up

Lateral - March 2nd, 2013 at 04:30 PM

Hi guys

I need to do some mocking up in order to check clearances etc whilst my new motor is getting built.

All I need is a short block minus the crank, pistons and cam. I need to have all of the exhaust and manifold studs in place.

The motor needs to be standard width.....

Thanks for any help.

Regards
Greg

grumble - March 2nd, 2013 at 05:08 PM

Greg I have a bare crankcase with a cracked oil gallery if that will help,it has no head studs.Les

Craig Torrens - March 2nd, 2013 at 05:19 PM

Hi Greg, I can help you out.....Ive sent you a pm.