Board Logo

Wtb late ghia dash
ULO062 - May 1st, 2013 at 01:02 AM

Hey,
I'm Lookin for a the steel section of a late karmann dash ideally
From pillar to pillar but can get by with just the drivers side.
Let me know what you have.
Cheers
Johnno
Fremantle WA
0400022470

empi - May 1st, 2013 at 09:38 AM

how late? year? rhd?

ULO062 - May 1st, 2013 at 11:08 PM

Hey,
Sorry for the lack of info, I think it's a 71, but I'm no expert, has one large hole for speedo, and two smaller guage holes to the sides at the top. Its a conversion from left to right, so RHD.
Cheers
Johnno.

vwo60 - May 2nd, 2013 at 09:37 AM

You would have a good chance getting one from the UK as they have a lot of salt damaged cars, i have seen them advertised there before.

empi - May 2nd, 2013 at 10:18 AM

I have one that has had a crappy conversion to RHD the parts may be of use, will get a pic over the weekend. get a glove box hole from KG Australia (WA)

ULO062 - May 2nd, 2013 at 04:38 PM

Thanks for all the replies! We do have the glove box section from gerry, was just trying to save some work by getting a rhd guage section. Will have a snoop around, and see if I can find one in the uk. Any suggestions on where to look in the uk?

empi - May 3rd, 2013 at 10:30 AM

Quote:
Originally posted by ULO062
Thanks for all the replies! We do have the glove box section from gerry, was just trying to save some work by getting a rhd guage section. Will have a snoop around, and see if I can find one in the uk. Any suggestions on where to look in the uk?



bite the bullet transfer yours across, u might on a wild goose chase for a RHD dash.

vwo60 - May 3rd, 2013 at 12:37 PM

Advertise on this forum, i have seen them being sold here before
http://www.volkszone.com/VZi/index.php