Board Logo

WTB (QLD) - 74 microbus Kombi parts
JacksonAndDad - July 5th, 2013 at 09:22 AM

My son and I are working together on a 74 Microbus 1800

I would like to buy good second hand original parts, not new reproduction if possible. We are trying to get this kombi registered on a budget, but prepared to pay the right money if neccesary

I need a host of things, happy to drive round SEQ to inspect....happy to pay postage from interstate

The list so far-

- Headlight dress rings
- Rear bumperbar rubber trim (full length one peice)
- Rear bumper
- Front aerial (split mount type)
- Handbrake handle
- Handbrake rubber boot (goes on floor in front of cab)
- Spare wheel latches (holds down spare wheel cover)
- Spare wheel tyre strap
- Full set of seat belts for microbus including front retractables
- Sliding door card and trim
- 2 right hand vent windows and 1 left vent window (for rear windows)
- front door outer window scrapers
- front door inner window scrapers
- Accelerator pedal
- Front seat well upper black trims (goen on the top of the steel wall behind front seats)
- Front seat well inner lower rubber matt (goes on sides of seat well)
- Rubber seals for front door air ducting
- muffler
- late model steering wheel (the thicker one)
- glove box interior
- VDO tacho and VDO oil temp gauages, probably no smaller than 2inch..dash has clock in it so no room there
- front dash rubber trim (the one that goes right across the dash) mine is all cracked

I'd be really happy to look over wrecks if you have them, sometimes you dont know what you need until you see it

Thanks in advance,
Tim 0439 737 134


bushed - July 5th, 2013 at 07:03 PM

u have pm
for some of these Tim


JacksonAndDad - July 8th, 2013 at 06:23 AM

Big thanks to Luke for the rear bumper and the vent windows