Board Logo

FS: Kadron set / CSP linkage / AS41 case and more
71super - July 9th, 2013 at 11:31 AM

Hi all,

I have a number of surplus items available after various builds lately.

All parts located in Launceston, Tas., will post at buyer's expense on most items. PM me with a postcode for a price.

Cheers, Steve.
PM or 0407 090 904

Kadron kit (Dual 40mm), 5,000kms old, in good condition. Comes with complete linkage kit (stock), freshly recharged K&N air filters, chrome tops, manifolds. Can supply new intake gaskets and fuel line at no extra cost if required. SOLD


CSP bellcrank linkage kit for Kadrons. Complete premium linkage. Barely used (less than 100kms) SOLD


EMPI valve cover vents $10

http://i113.photobucket.com/albums/n207/Super71Bug/Beetle%20Parts/IMG_1076.jpg

CSP Stainless steel heater hoses cut for doghouse cooler. Minimal use. $30

http://i113.photobucket.com/albums/n207/Super71Bug/Beetle%20Parts/IMG_1075.jpg

Stock 1600 pulley (New and unused Brazilian) $20. New fan belt to suit $10. (Or $25 for both)
http://i113.photobucket.com/albums/n207/Super71Bug/Beetle%20Parts/IMG_1077.jpg

AS41 case, freshly align bored and bored for 90.5mm, crack tested. Comes with head studs and main bearing set to suit .25 OS crank. SOLD

Used 90.5mm piston and barrel set complete with rings and gudgeon pins. SOLD

EMPI header and muffler 1 3/8". Surface rust only. SOLD

Flying Zucchini - July 9th, 2013 at 12:49 PM

Hi Steve, just sent you a text re the carbs.

fish26 - July 9th, 2013 at 02:59 PM

Hi Steve,
Interested in the case and Piston Barrel kit, will pick up.

cheers

ben
0413333833

bevelhead - July 9th, 2013 at 07:08 PM

PM sent

71super - July 10th, 2013 at 06:18 PM

All PMs replied.
Case and piston/barrel set sold.
Cheers, Steve.

71super - July 25th, 2013 at 04:56 PM

Bump

vduboy - July 25th, 2013 at 07:41 PM

Ill grab the csp linkage for the kads if you still have it mate..

vduboy - July 25th, 2013 at 08:17 PM

How much to post to Barden Ridge 2234?

71super - July 27th, 2013 at 02:07 PM

PM's replied. CSP linkage sold.

hulbyw - July 27th, 2013 at 10:34 PM

What size motor were the Kadrons used on?

71super - July 29th, 2013 at 08:49 AM

Quote:
Originally posted by hulbyw
What size motor were the Kadrons used on?


Hi mate, they are stock jetted. They were running well on a mild 1776. Cheers

71super - July 30th, 2013 at 07:57 AM

Kadrons now officially sold and sent.
Cheers

vduboy - July 30th, 2013 at 08:57 AM

Hi mate, received the linkage today. Thanks a lot!

71super - July 30th, 2013 at 11:00 AM

Hi mate, glad to hear it. It's a really nice set up, enjoy!
Cheers