Board Logo

WTB Torsion bars
eXraycer - July 15th, 2013 at 06:33 PM

Trying to find some thicker torsion bars for an IRS type 3.
675mm long. Want thicker than stock 22mm.
Square back (23.5mm) would be OK or tips where to buy some bigger dia aftermarket ones in AUS.

Cheers, Paolo.

Bone - July 15th, 2013 at 09:17 PM

Where abouts are you located?

Aussie Dubbin - July 15th, 2013 at 11:33 PM

Richard vforce or rod pen rose. Probs 300 ish

eXraycer - July 16th, 2013 at 12:08 AM

I'm in Sydney. Can get them picked up with my TNT acct or pay postage if they're not local.

I have a set of 625mm x 24mm that I can swap or sell also. They came from my swing axle subframe which I have since converted to IRS and will be using the double IRS spring plates with the longer housing.

Thanks for the reference Aussie . I will look into new ones if I can't find a set second hand.

Bone - July 16th, 2013 at 09:45 AM

May be able to help you out ! Will check it out shortly.

Bone - July 16th, 2013 at 12:23 PM

Pm sent.

eXraycer - July 16th, 2013 at 01:54 PM

Bone I did get pms from other members but I didn't get yours. Not sure why.
If that offer i already got doesn't work out I will PM you. Thanks for the reply though.

Also, My 625mm x 24mm bars are spoken for pending final settlement on price and payment.

vw54 - July 16th, 2013 at 06:02 PM

I have some Type 3 Station wagon bars

eXraycer - July 18th, 2013 at 10:22 AM

Quote:
Originally posted by vw54
I have some Type 3 Station wagon bars


Thanks for the reply. I have found some already.

If anyone else needs them feel free to jump in and PM vw54.

I was also offered a complete IRS wagon rear subframe with brakes at a reasonable price. If anyone needs it PM me and I will pass on the contact details.