Hi all,

I am looking at making some changes to my car, and at this point am not sure if I am going to buy all bits and pieces or buy a complete EFI/Turbo kit.

Obviously there are many ways to do this, but if I am going to buy and ECU here and put together a kit I will need throttle bodies with or without injectors, turbo air pressure tops etc. Might even go single throttle body and then would need inlet manifolds with injectors. Also am going to need crank angle stuff to suit, so pulley with teeth and pickup, coil/s, remote oil cooler, ECU, TPS, waste gate, efi fuel pump, injectors (about 43lbs or 450cc) and anything else you can think of.

So if you have anything of interest lying around, can you please post up here what you have and a price or PM me with the same.

Thanks in advance, Kev

P.S. I'm not after any factory efi stuff, so please keep that for yourself :-)

How about a whole engine just dynoed 240kw atw

what about adding a turbo to this ?

http://forums.aussieveedubbers.com/viewtopic.php?tid=102592#pid963074 

Thanks Craig!

Hi Kev,

This ( http://forums.aussieveedubbers.com/viewtopic.php?tid=102592#pid963074 ) is still available and the EFI setup is complete.

All you need to do is probably change the injectors and find the turbo hardware.

Regards
Greg

any interest in a 40DCOE & turbo under decklid kit?

Kev if you are going to make a kit from scratch I have a Mazda E5 throttle body and I think an injector rail with injectors that you can for nix if it is any good to you.Just let me know if you want it.
Cheers Les

Sorry Kev B6,the TPS is still on the body.

Hi Les,

thanks for the offer, I will see what happens and give you a yell if need be thank you. Not sure if the injector rail would be any good unless you could cut it and make 2 out of it and the injectors would probably be to small.

Just out of curiosity, what size is the the throttle body.

Cheers, Kev

hi Kev it is close to 46mm I also have a VS one it is closer to 70 this is an eyeball measurement)

our mate Adam had a CB efi set I think he never got around to using for sale, you could put it on while waiting for the turbo .
look him up on Facebook . Adam Bear Kirton

Fits under a decklid!

T54

nice

Drop Mario a call at http://thedubshop.net/ 

He can hook you up with all the efi stuff you need... And all proven to work beautifully well with boost.

Hi Humpty,

I have been watching this thread that Mario has just designed a new fuel rail which I think looks great. I will shoot him an email, thanks.

http://www.shoptalkforums.com/viewtopic.php?f=3&t=142813

Turbo54, does this mean you are the Adam Kirton that Ian Mezz is talking about.

Cheers, Kev

bloody hell kev you must be really worried about my 1775 to go to this extreme to beat me at a set of lights lol

Quote:

Originally posted by Camo Quote: Originally posted by Paulc1964au bloody hell kev you must be really worried about my 1775 to go to this extreme to beat me at a set of lights lol If it's a Friday afternoon in the west I have nothing to worry about, DO I And poor old Rosie has been ignored for so long, she wont perform when you want her to just to get back at you Kev