Board Logo

WTB - 010 or 019 Distributor
karstan - September 8th, 2013 at 10:36 AM

hi there

Looking for a 010 or 019 Distributor in working/good condition.

pm or sms 04316162988

thank you
karstan

sander288 - September 8th, 2013 at 01:18 PM

http://www.glenn-ring.com/bosch/ 

This is your man

oldtub356 - September 8th, 2013 at 03:16 PM

Yes, there's a 019 there...internal surface rust needs a tidy up but, the movement/play feels like new. (The body is standard black..not a Blue Screamer)
Have a 010 somewhere but I tidied up and cant find it at the moment....although I didn't find it much better than a 009 for road use..
Have a German 009 that was supposed to be mapped for a road 356 but still too short, may be better suited for the Dub.
I found that a 050 mechanical to be the best suited for the Dub...although I wasn't running twin carbs, just a single large Fish.
Anyway, you can come down (Blue Haven) and try them in your car and see what runs best for your set-up.
Regs, Lance.

lohoon - September 8th, 2013 at 03:59 PM

Agreed,I have a 050 with twin webbers. It's the best curve I have found.

karstan - September 8th, 2013 at 08:23 PM

Quote:

Anyway, you can come down (Blue Haven) and try them in your car and see what runs best for your set-up.
Regs, Lance.


Awesome mate ... its for a rajay turbo setup ... so wat suit a standard dub may not apply ... its just wat iv red from ohters on the samba

vw54 - September 8th, 2013 at 08:47 PM

buy a NEW 009 dissy but German not Chinese will do the same job and nice and new

fish26 - September 9th, 2013 at 12:14 AM

a new German 009 who's got em for sale?

6621104 - September 9th, 2013 at 07:38 PM

have a good J4R BR 8, the precursor to the 019. Same advance curve. Comes with cap, rotor and condensor all new or NOS. $140. pm if interested.