Board Logo

wtb /fan for inside fan housing - DOGHOUSE FAN
grogy - September 15th, 2013 at 10:31 AM

hi ,
i am after the fan that fits at the back of the alternator
[in the fan housing]. Doghouse oil cooler Housing
on the gold coast. QLD
thanks
greg 0406984440

pfillery - September 15th, 2013 at 09:03 PM

Narrow or wide ie 6v or 12v? Or are they the same? I have a 6v genny with fan attached, happy to separate. In brissie but post to GC is cheap enough.

bushed - September 16th, 2013 at 12:54 PM

6vlt early had less blades and noisier than later 6es
wide fans are kombi 12 volt i would say

Joel - September 16th, 2013 at 02:25 PM

Quote:
Originally posted by pfillery
Narrow or wide ie 6v or 12v? Or are they the same? I have a 6v genny with fan attached, happy to separate. In brissie but post to GC is cheap enough.


12 volt come in narrow fan too, all single ports were the narrow fan when they finished in 71.
He's after a doghouse fan which is the wide one.

Dasdubber - September 16th, 2013 at 04:00 PM

We have the welded and balanced doghouse fans (sorry no pic):
http://dasrestoparts.com.au/engine-1/fans-and-thermostats/cooling-fans-and-ha...

And also the standard non welded/balanced version:
http://dasrestoparts.com.au/engine-1/fans-and-thermostats/cooling-fans-and-ha...

Happy to help if you can't find a second handy
Al
DAS Resto Parts (07 5568 0143) - Burleigh Heads

grogy - September 16th, 2013 at 05:54 PM

thanks ,for the replies, i just picked one up this afternoon.