Board Logo

WTB - Judson Supercharger 36 - 40hp
oxford48 - November 14th, 2013 at 02:50 PM

WTB - Judson Supercharger 36- 40 hp any condition.
Located in Melbourne
Interstate is absolutely fine.
info@mioche.com.au

gusfallis - November 15th, 2013 at 01:24 PM

Hi there, i've got a 40hp one that has been reco'd and has all new bearings and seals.
Has been NDT inspected with no cracks found.
Faces machined within tolerances.
Original carby and judson aircleaner.
New oiler.
Only thing I don't have is lower pulley but I was going to use serpentine belt to run.
Only needs to be assymbled. I haven't rebuilt because I didn't want to put it together and just sit there.
I'll rebuild when I want to use ensuring everything is fresh.
Might be interested to part with for right money.
PM me with what you are looking at paying for one.
Cheers, Gus

vw54 - November 16th, 2013 at 08:38 AM

a bit of advice the 36 and 40hp housings are different in mounting studs locating and that makes them sit different on the manifold

so they vary, plus the 36s have twin drive pulleys and the 40s have single with and idler wheel

I have one of each fitted to both 36 and 40hp engines

lohoon - November 16th, 2013 at 11:31 AM

I didn't think the idler was a original part but a re engineered piece that could be fitted to either 36 or 40 hp engines?

vw54 - November 16th, 2013 at 01:50 PM

Quote:

I didn't think the idler was a original part



I haven't seen an Idler on a 36hp kit

However I do have a picture with idler on the Judson Instruction sheet I have for 40hp set up so it was an original part of the 40hp kit

oxford48 - November 18th, 2013 at 07:28 AM

Also interested in any parts associated with the Judson supercharger.
Pulleys, linkages, etc.

vw54 - November 18th, 2013 at 06:54 PM

I did get onto one a while ago but the guy couldn't make up his mind if he wanted to sell on not BUGGAR

sgetty - November 19th, 2013 at 11:51 AM

http://www.youtube.com/watch?v=jCoePBAQFvU 

vw54 - November 19th, 2013 at 01:33 PM

40hp for sale


http://www.youtube.com/watch?v=-LX7vfvSiuo 

oxford48 - November 19th, 2013 at 06:11 PM

Looks like a good buy...

oxford48 - November 22nd, 2013 at 11:08 AM

Any Judson's, still looking if you are thinking of parting with one.

gusfallis - November 29th, 2013 at 01:41 PM

Hi Eddy, tried to call but no answer.
Can't pm either as haven't posted enough to be allowed yet.
Working on that.
Pm me your email and I'll send photo's if you like.
Would take approx $1800.
All new bearings, seals and vanes.
Carby, linkages, original judson air cleaner and brand new oiler.
Only thing needed is lower pulley.
If it doesn't sell then I'll keep it for the Oval.
Cheers, Gus

oxford48 - December 4th, 2013 at 06:22 PM

Hi Gus,
PM sent.