Hi All Drag Racers,
I will be taking some no longer needed Drag Racing related parts to the Drags in Sydney this Saturday. See me on the day if you are interested - after about 35 years of Drag Racing, you accumulate lots of stuff!!
(Moderators and Craig, I hope this post is OK with you - if not,please PM me)
Parts are:
4 x Bridgestone Formula Vee fronts (22.5 x 15) suitable for front runners
2 x beetle front discs at minimum thickness, Porsche stud pattern with studs and nuts
1 x White rhino gearbox case (near new)
1 x magnesium rhino gearbox case (used)
My highly modified Street Eliminator heads 46 x 40 titanium valves, including modified 48 IDA inlet manifolds and gaskets (flow figures available on request)
1 x new 6 bolt flanged flywheel and J&G style pressure plate to suit 1/4" engine plate
4 x new 5.5" H beam conrods with 5/16"ARP 2000 rod bolts
2 sets of 94mm barrels (various piston clearances)
1 x new 45mm Dellorto DHLA side draft carburettor
No pictures, see them on the day

Lots more parts to come after the VW event

how much are you chasing for your heads?

cheers jamie