Board Logo

FS VW and Non VW Random stuff
Kuchster - June 29th, 2014 at 08:53 PM

Sandblaster, few parts missing, or use as a spare air tank, $offers
http://www.kuch.com.au/rob/forsale/fs1.jpg

Bandsaw blades, $free
http://www.kuch.com.au/rob/forsale/fs2.jpg
http://www.kuch.com.au/rob/forsale/fs3.jpg

Rodeo tonneu cover, fitted my 1990 space cab $20
http://www.kuch.com.au/rob/forsale/fs4.jpg

Holden Commodore seats, believe they are from a statesman or calais, around VP/VR/VS model $80
http://www.kuch.com.au/rob/forsale/fs5.jpg

Singer Sewing machine, immaculate $100
http://www.kuch.com.au/rob/forsale/fs6.jpg
http://www.kuch.com.au/rob/forsale/fs7.jpg

Kombi glass, fits the rear sections with the flipper windows $free
http://www.kuch.com.au/rob/forsale/fs8.jpg

Brand new blank door card kit for bay, $100?
http://www.kuch.com.au/rob/forsale/fs9.jpg

WBX 1.9 Engine, minus the reserve bottle, unknown if running but it turns freely, complete with loom and all, could be a good conversion for a bay or split $200
http://www.kuch.com.au/rob/forsale/wbx191.jpg
http://www.kuch.com.au/rob/forsale/wbx192.jpg

Caravelle middle 2 seater, few small tears on arm rests otherwise great condition $150
http://www.kuch.com.au/rob/forsale/fs10.jpg
0438 834 139 or PM, Location St Clair, Western Sydney.

donn - June 29th, 2014 at 11:01 PM

Consider the bandsaw blades sold, I'll be in Sydney Tuesday, pm me your address please.
Thanks
Don
The Mrs wants some more info on the machine, tell me what you can
Ta
Don

Kuchster - June 30th, 2014 at 11:46 PM

No worries Don, I don't have much to say about the machine except that it looks brand new, i've been told its a portable model. Its the greatest looking of all the machines i've had. I haven't tried it but you cant kill these old singers.

donn - July 1st, 2014 at 04:23 AM

Ok Mr. Kuch, here it is early ( really early) and I'm about to leave for the big smoke, I hope you get this so that I can catch you, call me please.......0419240315
Thanks
Don

pattso187 - July 1st, 2014 at 01:44 PM

Hi Kuch,

Can you give me some more info on the Dizzy on the WBX? I'm looking for an early style TCI setup. The one I'm after is the non points style that has the seperate module and vacuum and mechanical advance rather than ECU controlled. If thats the one fitted are you willing to seperate the ignition setup? If not I'll probably just grab the lot and sell the motor seperate later. Let me know.

Cheers,
Patrick.

Kuchster - July 1st, 2014 at 11:40 PM

Looks like i missed you Don? If you're still down then give me a call, my number is on the original post. Patrick, give me a call and i'll go and look at it for you.

psimitar - July 7th, 2014 at 08:28 PM

Hi there,

What's missing from the sand blaster? And approximate weight so can see if courier is reasonable on cost.

Cheers,
Mike

bushed - July 8th, 2014 at 09:15 AM

Mike and Donn I can bring stuff back to Bris next weekend
call me 0421286423