Trying to get heater reinstalled for a 2.0lt motor. previous owner had it disconnected but the bus is missing a couple of bits of the heating system. it has the heat exchangers and is complete on drivers side but on the passenger side is missing the pieces from the heat exchanger to the heater tube.
Just wondering if any one would have these lying about that they would be willing to part with.
Let me know.

Cheers Michael.

I should have a couple of these tubes ,I assume that it is the tube between the heater box and the control valve that you need.If not post a pic of what you need even if it is a hand drawn pic. Pm if you don't find it closer to home.

That's the one grumble.

The riser tube will be right I will have to have a scratch and make sure there is a valve to suit the passenger side.I will get back to you. Les

upper in pic (valve box) if same as 1600 I have a few in Bris
should be up in HB soon ,,,let me know if u r cmn down M.
B

From memory I think the 1600 ones are all intergrated in to the heater box and not a separate unit like these ones.

correct but I still have them here on this must ave been 1700 !!
pics if u email me
and

Whatever,if you want the bits let me know.

Pm sent grumble