Board Logo

Engine parts for sale - Sydney
hus22l - April 26th, 2015 at 08:03 PM

Hey veedubbers,

I'm doing a bit of a tidy up and there are some things I won't be using any time soon so I thought I would put them up for sale. If your interested, shoot me a pm - I can then give you my number and we can discuss more if required, I can send photos if you need them.

- nos Mahle 90.5mm (a) piston and barrel set. Brand new. Still has the cosmoline covering. Imported from the states. Make a 1776 or bigger with a stroked crank. $380. SOLD

- nos Mahle 92mm (a) piston and barrel set. Brand new, still with the cosmoline. Though one has some surface rust on the barrel from not being stored as well as I had thought (grrrr). These are thinwall. So not recommended for a bus. $300.

Edit - I have had a closer look, two of these have been trial fitted but not run, there is evidence of a gasket product near the sealing surface. The price has been knocked down due to this. I can bring them to the nationals if your interested. I will be there early.

- used Mahle 90.5mm (a) piston and barrel set. Good for a learning engine builder or someone with a tight budget. Will need a hone and new rings. $100. Good to go, engine failed for other reasons (nothing to do with pistons and barrels).

Located in western Sydney. Fairfield area.

Phil

warb - April 26th, 2015 at 08:27 PM

sweet, ill take the new Mahle..

hus22l - April 26th, 2015 at 08:29 PM

Not sure what you mean Warb?

warb - April 26th, 2015 at 08:32 PM

Quote:
Originally posted by hus22l
- nos Mahle 90.5mm (a) piston and barrel set. Brand new. Still has the cosmoline covering. Imported from the states. Make a 1776 or bigger with a stroked crank. $380.



sure mate, ill take these ones, just don't PM me, PM box full apparently?.. drop me an sms? O423 II3 654

hus22l - May 12th, 2015 at 05:21 PM

Bump!

NOS MAHLE 90.5 - pending payment.


Can arrange collection at Nationals.

hus22l - May 19th, 2015 at 08:10 AM

Update

90.5 sold.

New Mahle 92s still available - see additional comments in original post.

Used 90.5 still available.

I also have stock 1600 twin port heads with rockers. Looking for $100.

norbert - May 19th, 2015 at 06:07 PM

Had a couple of questions re: the used or the new Mahle's. Could you send me a text so I can call you.

0414 275 995

Thanks

hus22l - May 19th, 2015 at 08:02 PM

Text sent norbert, give me a call tomorrow.

hus22l - May 22nd, 2015 at 06:05 PM

Also got:

- twin port heads - cut for 90.5/92s. Good used condition. No cracks. Can include stock rocker set up too if required. Looking for $250.

- weber carbs and linkage, air cleaners and twin port manifolds. 36 IDF dbbl carbs. Awesome bolt on for a 1600 + motor. Looking for $600.

Phil