Board Logo

FREE (and some cheap) stuff Brisbane ~ nothing over $15!
adlbeetle66 - April 27th, 2015 at 04:27 PM

Need to clear some stuff out so here goes :)


2 X Flywheels - $5 each
4 X Tappet covers - FREE
3 X Single Port Carby Manifolds (type 1, 3 & 3.) - $5 each
4 X Assorted Single port heads - $15 pair
6 X standard rocker assemblies - FREE
4 X Standard fuel pumps (unknown conditions) - FREE
1 X Beetle fan shroud $10
2 X Beetle Bonnet hinges and springs (1964) $15
2 X Single Port Cylinder Tinware $10
4 X Assorted Oil coolers - FREE

Can get pics if you need them...
Or more info :)

Sms or call me on 0447 055 03 five

bushed - April 28th, 2015 at 07:18 PM

r tap cvrs 1600 pls 2 to me...

any 36 hp items or what hpor cc are they pls??

adlbeetle66 - April 28th, 2015 at 08:31 PM

OK, will have a look....

Also think i have some 1100 heads and tappet covers (smaller i think?)

Cheers

adlbeetle66 - April 29th, 2015 at 12:35 PM

Here goes for pictures!!

OFFERS??

adlbeetle66 - April 29th, 2015 at 12:36 PM

.

adlbeetle66 - April 29th, 2015 at 12:37 PM

..

adlbeetle66 - April 29th, 2015 at 12:38 PM

...

adlbeetle66 - April 29th, 2015 at 12:39 PM

....

adlbeetle66 - May 2nd, 2015 at 09:29 AM

Bump... I do need this stuff moved.. probably 75% of this is free if someone wants to come over and take the lot? :tu:

pudgy - May 2nd, 2015 at 07:53 PM

Do you still have any of the cranks (mainly after the gears etc., but I'll take a whole crank) and tappet covers?

adlbeetle66 - May 2nd, 2015 at 08:06 PM

Yep.. got 3 cranks left... come take your pick...
Half a dozen tappet covers left...

Come and take it away :tu:

adlbeetle66 - May 7th, 2015 at 07:17 PM

Still want those bits pudgy?

Engine case, 4 tappet covers, alternator stand, cam, crank & conrods, and 2 heads sold today...

Hurry!!

pudgy - May 7th, 2015 at 08:16 PM

Yeah sorry I had sent you a PM...not sure if it went through. When is the best day and time to pickup?

adlbeetle66 - May 7th, 2015 at 08:23 PM

Nup.. didn't get it :(. Will send u a PM.

beetle_nut - May 7th, 2015 at 09:35 PM

Have you got any 36hp motor bits.

adlbeetle66 - May 8th, 2015 at 07:12 AM

Have got some push rod tubes (they are quite small compared to the others i have..)
I have a really small head..
And a barrel or two maybe!

Sent u an email...

adlbeetle66 - May 18th, 2015 at 04:28 PM

Nearly 50% gone!

Come and take peoples!

Strogger - May 18th, 2015 at 07:28 PM

Hi Mate,
Chasing a 12v flywheel to suit my 1300.
Not sure what else to tell to see if it suits.?

Need one with a good ring gear and machinable clutch face.

Thanks,
Anthony.

adlbeetle66 - May 18th, 2015 at 07:55 PM

Yep.. standard 180mm Flywheel is there.. $10. 6 or 12 volt?

Cheers

adlbeetle66 - May 23rd, 2015 at 07:29 PM

Bump, SMS sent Anthony...

adlbeetle66 - June 7th, 2015 at 01:02 PM

Most is gone..

If you see something you want - ask!!

Need this all gone please!!

mossman - June 11th, 2015 at 10:33 PM

Do you still have the 12volt fly wheel?

adlbeetle66 - June 12th, 2015 at 06:58 AM

Hey,

Yes, I have 2 flywheels left, not sure if they're 12 v or not though..

Do you know how to tell?

Thanks

mossman - June 12th, 2015 at 08:10 AM

Pretty sure the 12 volt flywheel has 130 teeth. The 6 volt fywheel has less - maybe 109.
Cheers

adlbeetle66 - June 13th, 2015 at 06:55 PM

Just checked against a spare 12v 8 dowel flywheel i had, and its a 6v sorry.

mossman - June 13th, 2015 at 09:59 PM

Ok. thanks for checking. Do you have a dual port inlet manifold centre section with the preheaters by any chance?
Cheers

adlbeetle66 - June 14th, 2015 at 06:59 AM

No sorry.. only have the inlet manifold ends...