Board Logo

200mm 6v fly wheel
jobie - October 6th, 2015 at 01:06 PM

Hi All,

I am after a 109 tooth 200mm fly wheel. I don't really want to grind away the bell housing on the gearbox I have.

I'm in Melbourne.

Cheers,

Joel

coletrickle - October 6th, 2015 at 03:44 PM

I have a few 180mm 12v oring flywheels?

vw54 - October 6th, 2015 at 03:46 PM

Quote:

I am after a 109 tooth 200mm fly wheel


extremely hard to find these days better off grinding the 4 tabs on the box

bushed - October 6th, 2015 at 11:10 PM

may have something but in Qld 4306

jobie - October 9th, 2015 at 10:32 PM

Thanks bushed. What you got? 0412 356 triple 5

bushed - October 9th, 2015 at 10:36 PM

oh must look in the mornís 6vlt and gd teeth and dowell holes from mem.

bushed - October 10th, 2015 at 11:03 PM

is the 200 mm the holes for the clutch?? clutch size would be 180mm +
teeth are right number
dowels are right

OZ Towdster - October 11th, 2015 at 08:37 AM

Bushed they are a 6 volt flywheel , ie no o ring groove , 109 teeth , and take a 200mm dia clutch plate

bushed - October 11th, 2015 at 01:44 PM

cheers

jobie - October 14th, 2015 at 05:14 PM

Hi Bushed,

How did you go with looking for fly wheels?

Joel

logan - October 14th, 2015 at 05:34 PM

Bustoration in the USA sell them. Also DPR ... if you have look through the vintage speed forum on the SAMBA you will also find a could of other shops in the USA that sell them.

hope this helps

bushed - October 14th, 2015 at 05:40 PM

was given a wheel I was told was 6 volt only turned out to be 12 vopt sorry do have clutch now