Board Logo

Disc brake kit and narrow beam uprights
spectral - March 13th, 2016 at 09:02 AM

Hi guys,

Have these from a project I'm parting out:

5x205 front disc brake kit
Not much use, bit of surface rust on the rotors as is normal when they have been sitting for a bit. The surfaces are smooth however. Pads have plenty of meat left of them. Includes all bolts, brackets, bearings, hub nuts, hoses.. everything you need.
These suit an early beetle (link / kingpin) front end.
$350.
http://www.clubmans.com/forsale/disk_brakes1.JPG
http://www.clubmans.com/forsale/diskbrakes2.JPG
http://www.clubmans.com/forsale/diskbrakes3.JPG




Also have a set of uprights for a link/kingpin front end so you can retain your shocks while narrowing the beam just that little bit more. Unused. Bought of someone who laser cuts them on this forum, i forget there name. $140.

http://www.clubmans.com/forsale/narrow_beam_uprights.JPG
http://www.clubmans.com/forsale/narrow_beam_uprights2.JPG



Pickup in Wavell Heights (inner northside brisbane)
Can post on top of prices, the brakes won't be that cheap due to weight, but can be done.

Get me on PM or 0four37 four37 74six

Thanks all
Paul.