Board Logo

WTB 12v generator for 36hp
Scratch - July 21st, 2016 at 08:31 PM

WTB. Any method of 12v 36 Hp alternating/generating

Porsche GR26X generator
rewound 6v to 12v original.
whatever.

Any help would be appreciated

mackaymanx - July 21st, 2016 at 10:37 PM

Best bet is the generators from the industrial motors, 12 volt/38 amp, usually found on the compressors. I only have a casing left with no armature, had to push it out with a press it was that rusted.


http://forums.aussieveedubbers.com/viewtopic.php?tid=110003&page=1#pid102...

Menangler - July 22nd, 2016 at 01:22 PM

http://www.ebay.com.au/itm/252351402873?_trksid=p2060353.m1438.l2649&ssPa...

BUGBOY - July 25th, 2016 at 02:48 PM

I have a few if your still looking.

Scratch - July 31st, 2016 at 04:37 PM

Hey Bugboy PM sent. For everyone else on here, What's the going rate? I would love one of the 30+amp type. Reading your blurb below, I'd be interested in 12V semaphores as well.

THhanks for the ebay link. Ever used the GR11X? I've only researched the GR26X.

psimitar - August 6th, 2016 at 10:50 PM

Quote:
Originally posted by Scratch
I'd be interested in 12V semaphores as well.



It's quite straightforward to rewind the semaphore solenoid to 12v spec by using enamel coated wire from Jaycar. did mine a few years back and have worked just fine :)