Board Logo

WTB Type 1 Floorpan
karmann141 - November 9th, 2017 at 08:21 PM

I'm looking to buy a bare BJ/Swing axle chassis, preferably with stuffed floor pans as I will replace them.

Must have a rust free frame-head, unmolested tunnel and frame-horns. I don't need any of the suspension, torsion bars, spring plates etc just a good frame-head and tunnel with frame-horns and torsion tubes intact.

Second choice would be as above with KL frame-head.

Also after a pair of standard BJ spindles.

Preferably in Brisbane or the SE corner.

Please PM or txt me (0407 576 802) if you have something you want to get rid of.

Cheers

montybug - November 14th, 2017 at 11:49 AM

I have one in Melb..good chassis and head but rusty pans, slight molestation as had a bit of the flanges cut out from the wishbone..probably in an attempt to add irs.

karmann141 - November 14th, 2017 at 05:01 PM

Quote:
Originally posted by montybug
I have one in Melb..good chassis and head but rusty pans, slight molestation as had a bit of the flanges cut out from the wishbone..probably in an attempt to add irs.


Thanks pm sent

montybug - November 14th, 2017 at 09:19 PM

Dint get your PM mate...but here's a photo

montybug - November 14th, 2017 at 09:22 PM

chassis number is 1102990521

karmann141 - December 16th, 2017 at 05:35 PM

Still looking for something closer to home.

Cheers

montybug - December 19th, 2017 at 12:53 PM

Mine was sold last week....going under someones buggy to be restored.

vanell - December 19th, 2017 at 03:20 PM

I have 2 of these in Adelaide, Ian

karmann141 - December 19th, 2017 at 07:31 PM

Thanks Ian will definitely take them after our chat. Will call you.
Cheers