Board Logo

Wanted...... A good kick in the spindle nuts !
yasdnil01 - December 31st, 2017 at 05:11 PM

Howdy

Here is my story....sad but true
After 2 days of looking in vain I've come to the conclusion that I lost me nuts !....link pin spindle nuts that is !
I would have taken them off years ago and put them in a safe place ...now i just can't find that safe place, there must a black hole some place cos i often look for tools and other items and they just disappear on me.

So I'm now chasing after a set of 4 of the type 1 LH and RH thread link pin/ king pin spindle nuts and 2 X lock tab washers and 2 X thrust washers

Or the EMPI 9616 Alloy split clamp / nuts would do the job

So if anyone has a some old 2nd hand nuts and washers
Let me know

Cheers

cb john - January 1st, 2018 at 12:04 AM

"put them in a safe place"

I've done it in the past, I still can't find the safe place...:lol:

yasdnil01 - January 1st, 2018 at 05:47 AM

Yep...... I'm thinking maybe i should buy a safe to place my safe place safe in place just to be safe :dork:

vw54 - January 1st, 2018 at 06:48 AM

Kombi or Beetle ??

I think everyone has a SAFE PLACE as I can not find some of my Oval Bits

yasdnil01 - January 1st, 2018 at 07:02 AM

Beetle

vwo60 - January 3rd, 2018 at 08:06 PM

The aluminium spindle nuts hands down, i run them on my car.