Board Logo

WTB: larger than stock engine or parts
karmannghia60 - March 23rd, 2019 at 06:23 AM

Looking for anything 1776 or larger
If it needs work, it's ok as long as it's usable
Preferably in Melbourne

Rafik
Kew East

hulbyw - March 23rd, 2019 at 05:17 PM

Don't have an assembled engine but do have surplus to requirements a dual relief case line bored and machined to take 90.5,s. Also have a reground crank and bearings to suit. Neither have been assembled/used since machining. Also have a reground cam (Wade 149/Porsche Super 90 grind) and lifters.
Cheers.....Wayne

karmannghia60 - March 25th, 2019 at 08:30 PM

PM sent

karmannghia60 - April 1st, 2019 at 10:44 AM

Bought the parts from Wayne (Thanks Mate)

Now looking for heads and pistons/cylinders if anyone has some floating around to suit a 1776 or 1835

Cheers

bushed - April 1st, 2019 at 11:06 AM

Have some 91mm ? (willcheck) pistons and barrels, need new rings due to breaking 2
from 1800 eng? didn use emm, due to mate giving me a good larger 93mm set at the time.. pm if keen

Walka - April 5th, 2019 at 07:55 PM

I have a set of used 1776 barrels and pistons , they need to be honed and you need rings $200.00

karmannghia60 - June 17th, 2019 at 09:08 PM

So far I found a case, crank, cam, followers, rods and a pair of 40 DCNF
I think I will buy a new set of P&C

Still need a pair of heads and linkage for the DCNS. Anyone has something to offer?