Board Logo

CB performance?
ruckus - October 4th, 2004 at 03:23 PM

where can you get Cb performance parts for a decent price in Melbourne? Or do you have to get them over the net?

LOWBUG - October 4th, 2004 at 04:22 PM

Ask Dave He'll know

MikeM - October 4th, 2004 at 04:27 PM

Quote:
Originally posted by LOWBUG
Ask Dave He'll know


And that would be who?

shiftyvw - October 4th, 2004 at 05:18 PM

Quote:
And that would be who?


Dunno, ask dave.

Andy42 - October 4th, 2004 at 05:54 PM

You know dave....he is Dads son :P

56astro - October 4th, 2004 at 06:23 PM

Lowbug, you've got the RAT in you today!!

:beer

vw54 - October 4th, 2004 at 06:37 PM

Ruckus.... Vintage Vee Dub in Sydney have most of the CB parts available.

Give eum a call 02-9789-1777

Dasdubber - October 4th, 2004 at 07:37 PM

Ah yes, or bring them in yourself (take into account freight and possible taxes/GST etc you may incur though). Do a price comparison for what it costs you to buy it from a supplier here vs what it would cost you to bring it in yourself (I have brought a lot in due to difference in costs). As long as your order is under around US$100-150 approx they usually (don't quote me) don't charge you duty etc - but it is luck of the draw really.

bugmeister - October 4th, 2004 at 08:10 PM

The killer with CB is there insistence to ship UPS. I found a guy selling on The Samba that seems to resell most CB stuff and is willing to ship USPS. And get this he has US$249 CB strokers. I ordered my stroker and turbo header from him last week. US$49 shipping for the crank and $79 shipping for the header and a few other things (Ti retainers and IDF 34mm vents).

I don't know the guy, but was simply very happy with the service. A thread on Shoptalk Forums doesn't have a bad word against him as far as I could tell. Now to save for the those CNC wedge port heads, and to pray the 6-8 weeks (sic) USPS economy shipping gets here before chrissy.

His email addy is gscco@msn.com, name Stephen Houston.

barls - October 4th, 2004 at 08:25 PM

Quote:
Originally posted by LOWBUG
Ask Dave He'll know

which one? there are like a dozen on here at least

VWCOOL - October 4th, 2004 at 08:29 PM

Quote:
Originally posted by bugmeister
The killer with CB is there insistence to ship UPS. And get this he has US$249 CB strokers. I ordered my stroker and turbo header from him last week.
I


Now all you got to do is get the crank heat treated and ground!

beerdoc - October 4th, 2004 at 09:35 PM

KNOCK ! KNOCK !

Hello

Its me DAVE I got the stuff

Daves not home maaaaaannn








A bit of cheech and chong

56astro - October 4th, 2004 at 10:36 PM

Quote:
Originally posted by VWCOOL
Quote:
Originally posted by bugmeister
The killer with CB is there insistence to ship UPS. And get this he has US$249 CB strokers. I ordered my stroker and turbo header from him last week.
I


Now all you got to do is get the crank heat treated and ground!


Their "super race cranks" are already nitrided (if that's what ya mean).

Certainly won't hurt to get it checked out though!

Turbo54 - October 5th, 2004 at 09:41 AM

Hi, I have got the following over the net and when the dollar is good (around 70+) it works out a lot cheaper. I have done it both ways, over the net on visa and on the phone and all my stuff has arrived promptly. The problem is you dont know exactly when they will put the money through so the conversion may vary the price a little. There are things that are excluded from import duty and if you car is old enough (Like my 54) lots of things are exempt. I would definately look into buying direct.
I have bought
CB SUPERCASE 94mm Clearanced and full flow oil
Street Eliminator Heads
78mm super race Crank
Total Seal Rings
And other bits and peices.
Hope this helps
T54