Board Logo

WTB 16x8 kombi mags
Andy42 - December 24th, 2004 at 05:28 PM

I am after a set of 16x8 kombi stud pattern mags to run on my buggy. Somethin a bit stylish would be good but they still have to be able to handle offroad abuse. Prefer alloy but would consider steel.
HAVE A MERRY CHRISTMAS ALL. :beer:beer

[Edited on 24-12-2004 by Andy42]

11CAB - December 24th, 2004 at 08:50 PM

Try VolksConversions at Labrador on the Gold Coast, he has a heap of different Kombi mags in 15's & 16's

Andy42 - December 25th, 2004 at 07:44 AM

Or even 2 off16x8 and 2 off 16x7.

MikeM - December 25th, 2004 at 08:53 AM

how come you aren't using hilux PCD? What changed?

Andy42 - December 25th, 2004 at 09:46 AM

Well I am running kombi hubs and axels on the rear and I can not find anywhere that makes up blank hubs for under about $900. So I have to use the standard kombi drive flange which I do not believe to be suitable to be drilled to a landcruiser pattern. You can buy blank beetle drive hubs easily though. I do have a set of front beetle disks which were blanks now drillled to a cruiser patern if anyone wants them. for $200.

Andy42 - December 27th, 2004 at 06:35 AM

bump

karmen - January 4th, 2005 at 11:06 PM

Andy, how about 16 x 7.5 J Merc Alloys

54 PCT just found out they won't fit my Merc front (e220)

are Kombi Pattern and have 4 in vg cond. have large face and abot 18 small squarish slots on the outside the size of a matchbox.
will e-mail a pic asap

4122 4434 M'b'ro'

or email me