Board Logo

WTB:Bay kombi sliding mechanism
Vw nutter - January 17th, 2005 at 04:23 PM

hey guys im after a bay kombi sliding door mechanism, if anyone has got one in really good nic let me know, its for a 74 door if that helps.
thanks

[Edited on 18-1-2005 by Vw nutter]

Crazy George - January 17th, 2005 at 04:27 PM

Hi.. got one here in Brisbane off a late bay.. Blu .. And very straight!!!... but>>> rusty at base where window sits. :(
fixable...Thanxs g

ClassicVW(pacific) - January 17th, 2005 at 04:54 PM

#! Message No Longer Available !#

helbus - January 17th, 2005 at 10:00 PM

C'mon VW nutter tell 'em all your story.

Someone help the lad. He is doing up his first car for when he gets his licence. If I had a spare door I would give it to him. I gave a door away for $20 only about 4 years ago, have none now, so somone must have a reasonable straight one for him.

rustycamper - January 17th, 2005 at 10:12 PM

Ive got one that I bought from Modulus about a year ago for $40. Ill give it to you for that if you want. Its in Melbourne but down at Mornington at my folks place at the moment. I have an image somewhere, Ill post it in a bit.

Vw nutter - January 18th, 2005 at 12:22 PM

thanks helbus and rustycamper but i managed to find one at a wrecker the other day but the thing is that the mechanism from it is missing you know the bit with 4 bolts, half of it goes into the door and the other bit goes onto the sliding rail, if any one has one let me know, preferably in good nic,
thanks guys

bus914 - January 18th, 2005 at 07:17 PM

if you need new nylon bits, they're available too:

www.bughaus.com/type285.htm

[Edited on 18-1-2005 by bus914]

Vw nutter - January 19th, 2005 at 11:45 AM

thanks bus914 i will try them!

Vw nutter - January 20th, 2005 at 05:35 PM

there all sold out!!!ahhhh,
any one got a roller hinge??? the bit with nylon and the little metal roller??

Vw nutter - January 21st, 2005 at 05:50 PM

woohoooooo i found one!!!:bounce:bounce:bounce:bounce:bounce:bounce:bounce