Board Logo

WTB: Steel rims suit 4 stud
Gracey - October 27th, 2005 at 12:36 PM

WTB: Widened standard type steel rims to suit 4 stud beetle either 15 x 6 or 15 x 7 if they fit under the std guards.
Quantity required = 2 (these are for the rear)

Andrew Grace

[ Edited on 3-1-2006 by Gracey ]

NCH-003 - October 27th, 2005 at 02:44 PM

I have 4 of these rims.just u2u me and will e-mail some pics if you are still looking
Derek

Gracey - October 27th, 2005 at 05:20 PM

Derek, you have u2u.

Andrew

Wag67 - October 27th, 2005 at 05:31 PM

i may have a couple as well give me a u2u and i will see if i can send a pic for you

Gracey - October 27th, 2005 at 06:41 PM

Wag you have u2u.

Andrew

Gracey - January 3rd, 2006 at 12:31 PM

Still looking.

droopz - January 3rd, 2006 at 02:21 PM

lol... good luck with it. These "common items" seem to be very difficult to get out of people.

battybat - January 3rd, 2006 at 08:52 PM

if my pan goes without the transaxle I'll have a couple - 4 stud, 15", with 205 tyres on - they don't really fit under the guards tho - but it got through NSW rego with them on a few times

I'll let you know when I find out whather the pan is sold

cheers

Terry

Gracey - January 3rd, 2006 at 09:02 PM

Thanks Terry, do you know if there 6 or 7" wide?

Brad - January 4th, 2006 at 07:34 PM

Did you get any yet ?

I have a set of 15" Baja Wheels, they are widened stock rims. 15 x 7 for the rear and 15 x 6 for the front. They offset is as close in as possible to run a 31" rear and a 235 x 75 x 15 front.

They are 4 stud and I am after $300 for the set. I am only selling as I just upgraded to Alloy Mags

buzzbox - January 4th, 2006 at 07:47 PM

Saw a set at Vintage Veedub a few months back.

Gracey - January 4th, 2006 at 09:39 PM

Brad I sent you an email.