Board Logo

Carby Jets
76camper - December 5th, 2005 at 07:23 PM

Now have the $$ for some jets for my type 4 2L kombi. I beleive it currently have either largers than stock jets or reamed stock yets. Does anyone have a set of stock jets for Solex 32-34 PDIST-2 (RHS) and 32-34 PDIST-3 (LHS) carbies or know what size is stock and where i can get it from? Thanx guyz.

76camper - December 5th, 2005 at 07:23 PM

.

Bizarre - December 5th, 2005 at 08:27 PM

http://www.type2.com/library/fuel.htm#3 

Try here for ideas

Then ring
CARBURETTOR SERVICE CO PTY LTD
240 Parramatta Rd Burwood 2134 (02) 9747 4066


Your in trouble if THEY dont have jets for it

76camper - December 5th, 2005 at 08:46 PM

awsome, thanx heaps for your help. No 1 got a spare set lying round?

Beerboy - December 6th, 2005 at 07:03 AM

i keep reading that motorbike ones are the same. this is for a pict34 -4 though.

just increased mine but want a touch smaller

Bizarre - December 6th, 2005 at 07:28 AM

As a stop gap measure you can solder them back up and then redrill them

This should only be done for correcting and over drilled jet and checking purposes.
Once satisfied you should buy the correct ones.

There are also reamers as opposed to drills.

Reamers leave a smooth edge as opposed to the rough edge of the drill

76camper - December 6th, 2005 at 02:30 PM

"just increased mine but want a touch smaller"

bought a new set or reamed/drilled?