Board Logo

WTB: 46mm Big Nut Reduction Boxes or Gears
matara - January 3rd, 2006 at 10:53 PM

The hardening has gone on the gears on my reduction boxes, and I want to keep it stock. Surely someone has IRS'd a bus and has some of these cluttering the yard.

I only need the gears but I'll happily take the lot.

Must be in Sydney or able to get them here.

Cheers

Steve

Beerboy - January 4th, 2006 at 04:27 PM

what year?

does it matter?

matara - January 4th, 2006 at 07:41 PM

64-67 is the 46mm hub nut reductions which is what I'm after.

pre 64 are all 36mm

Cheers

Steve

Beerboy - January 5th, 2006 at 07:28 AM

mines a 61 so no use to you

Menangler - January 5th, 2006 at 07:41 AM

Steve,
I have a set down here if you feel like a drive down to Nowra. $50.00 the lot