Board Logo

Wheels and Tyres Fund raising sale: Steel, Aluminium, Fuchs
dangerous - January 24th, 2006 at 08:26 PM

Selling my wheel collection to fund some new ones for my drag car.
Most have tyres, but I need to sell enough pairs so that my car can still be moved about, and wont be wheel-less for long.
Dave Butler.
Contact by u2u.
4228 QLD.
Reedy Creek Gold Coast.
Pick up only.

15 x 4 spindle mounts, one has been repaired.
Otherwise good condition, to suit linkpin, or BJ with bearing sleeve,
$250 weigh 3kg each.

[ Edited on 25-1-2006 by dangerous ]

[ Edited on 25-1-2006 by dangerous ]

dangerous - January 24th, 2006 at 08:32 PM

I had these made up out of some 4" Dragways and some 12" other brand.
They were all welded together to suit a 3" backspace.
Have M/T 11.5 x 28" tall drag slicks and are off the crashed car but are still straight.
$500.
Info as above.

dangerous - January 24th, 2006 at 08:42 PM

These look rough but are in good shape.
The tyres are "Skyway" radials and are with good tread.
I use them to chassis dyno my car.
$200 .

dangerous - January 24th, 2006 at 08:48 PM

These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

dangerous - January 24th, 2006 at 08:56 PM

Not real keen to part with these since I just bought them.
One wheel has been repaired but is still in very good shape.
Rear 205x65 tyres are 95% and front 195x60s need replacing.
For you purists, pn.911 361 020 00 for the front.
pn.901 361 012 06 for the back.
Price is $1000, and is what I paid. Would like more but dont thik the forum rules allow auctioning!?

dangerous - January 24th, 2006 at 09:03 PM

Off the front of my drag car.
Excellent shape.
$100.
I would like to buy some new or near new, 15x7,and 15x4,
aluminium wheels, with VW 4 stud pattern.
Can go an inch either side for width on the front, and
6.5 to 8" on rears.
May also consider wide five in the correct widths (BRMs yum!).
PS keep you up my sleeve HS.

dangerous - January 25th, 2006 at 06:14 AM

Sorry
Yes, all are pairs except the Fuchs that are to be sold as a set of 4,
but are two pairs of slightly different 15x6s for font and rear.

dangerous - January 26th, 2006 at 06:25 AM

Any businesses stock the wheels I want?

reub - January 26th, 2006 at 07:54 AM

Quote:
Originally posted by dangerous
Not real keen to part with these since I just bought them.
One wheel has been repaired but is still in very good shape.
Rear 205x65 tyres are 95% and front 195x60s need replacing.
For you purists, pn.911 361 020 00 for the front.
pn.901 361 012 06 for the back.
Price is $1000, and is what I paid. Would like more but dont thik the forum rules allow auctioning!?


Do they come with front disc conversion kit for king and link and rear hubs to match as were sold with them?

http://forums.aussieveedubbers.com/viewtopic.php?tid=47466&page=1#pid442985

dangerous - January 26th, 2006 at 09:46 AM

Yes, but...
The front discs are to suit a linkpin beam,
and the rear drums are to suit a short axle spline.
They need one nut on the rear studs,
and the fronts are just redrilled vw rotors so are bogus (not studs, just tapped.

Pete - January 27th, 2006 at 08:14 AM

you have u2u about these
thanks
pete

dangerous - January 27th, 2006 at 07:14 PM

You mean these?
No U2U yet 7.10pm Friday.

subibaja - January 27th, 2006 at 08:28 PM

whats your number and i will get the fella to give you a ring about those 15x7
thats what the u2u from pete was about

terry

moron - February 4th, 2006 at 07:38 AM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300


Are these wheels still for sale?

moron - February 5th, 2006 at 07:16 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 5th, 2006 at 07:23 PM

In regards to the 15" x 7" wheels on the drag car, are they still for sale?
You can contact me on 0411 533 194.

Dak-A-Tak - February 5th, 2006 at 09:24 PM

Mr Head, Dangerous has just left on holidays on a big boat for a couple weeks. Far as i know, the steel wheels are still for sale. The spindle wheels sold (me). Fuch's and brakes are sold.( 48ida)Dangerous is having a rest!!!!

moron - February 14th, 2006 at 07:17 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 14th, 2006 at 07:19 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 14th, 2006 at 07:29 PM

Thanks Dak for the reply can u find out for sure if 7x15'' wheels r still a goa as soon as Dangerous comes back as i will get someone to call and grab them. waiting to hear from u thanks again from Head.

moron - February 17th, 2006 at 08:33 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 17th, 2006 at 08:33 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 17th, 2006 at 08:47 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

moron - February 17th, 2006 at 08:49 PM

Quote:
Originally posted by dangerous
These are in excellent shape and the wheels are currently on the back of my drag car.
Tyres are 95% and will not separate.
$300

Alex Holzl - February 18th, 2006 at 01:02 AM

please do not double post dickhead!


Hehehe sorry had to say it! :smilegrin: