Name: Brad
Location: Brisbane
Contact - brad@aussieveedubbers.com
Items - Kombi's and Parts ..

I have a heap of Kombi's and kombi parts that I am looking to move onto a new home. I have at least 10 vans in various states from driving and almost RWC to no just rolling shells.

Post your questions on here and I will provide pics and descriptions. Happy to send anything or pickup can be arranged from Stafford once parts are paid for..

Payment for parts is Direct Transfer prior to pulling and I am happy to refund if the parts don't match the description I give. I will not be pulling parts if they are not paid for. Same goes for the shells and vans, not interested in tyre kickers, if I have it and you want it I will sell it. If you don't know what you want and you just want a look then admission is $1000 and you get a free van when you leave.

If you want rolling shells and the likes I am happy to deliver as part of any deal made.

Prices - starts from free and go up from there:

Rolling Vans
79 Double Door - Needs complete rebuild, rolling shell, has doors, dash etc no motor or gearbox - $50
72 Panel Van with windows on one side, no motors, complete apart from that, was driving well when parked, has towbar, NO RUST, green in colour - $500
76 Camper - Complete interior, pop top broken, Auto, full width bed, swivel table, good cushions, Auto box still there, engine gone, front door gone, slider gone. Interior is in good nick - $350
76 Pop Top - 2L Engine, runs well, needs a Lower Ball joint for RWC, some scraps and dings, drives well ready for work. Has no interior in rear, 1800 transmission, test drive welcome, white in colour - $1000
76 Van - Great Body, no rust or dings, sitting in primer, 16" mags, awesome project ready for an EJ and a coat of colour after some cleaning as it has been sitting quite a while - $1000 firm
Mixed Kombi's - 76 Micro, 75 Van, few others of mixed years, prices from $50.

Parts
Roof Mount Kombi A/C Complete with instructions - $600
Rear seat for microbus with clamps - $150
Middle seat with clamps - $150
Rear seat fully retrimed with clamps - $250 ( grey and black)
NEW Kombi Camper Interior, great quality ready to bolt in with sink and fridge - $850 - No Stove or gas regulator.
16" 5 spoke mags with low profile tyres, ready to bolt on - $650
Mesh screen for kombi - $25
Doors, interior parts, trim, wheel, front ends, rear ends.. etc etc etc .

I am looking to make some space here and am keen to move some of this stuff on to people who can use it. I will provide as many pictures and as much info as possible.

I have NO 2L Transmissions for sale.

Post your questions here……

[ Edited on 12-5-2006 by Buggy Brad ]

[ Edited on 12-5-2006 by Buggy Brad ]

[ Edited on 12-5-2006 by Buggy Brad ]

Pics of the mags?

Brad how about a set of matching door locks and ignition< for three doors? Well its worth the ark. also would like a steering box that is better than ordinary ,as i have an ordinary one. I am also chacing a perfect bulkhead top pad from a non walk through . let me know . mitchell

hi brad ,do u have a 2ltr crank and rods floating about? cheers jack.

Pics of mags when I get home tommorrow night.
Door locks - sent you an email
2L cranks and rods ..... should have but they are in a 2L bottom end. $150 for the lot and I will even drop it off the back as I drive past your hpuse every day ...

Pics of New Interior



Stove is not included as it is now fitted in the T25



[ Edited on 12-5-2006 by Buggy Brad ]

Hi Brad, haven't taken the rear out of the type 3 yet - interested in some $ instead ??? Good luck with the kombi's - nice prices. David

hey brad after towbar for a 76 kombi camper

David - No rush ...
Towbar ... yep will have a towbar . $65 with tongue and ball

can you post a pic of the rear seats. interested in the middle one but will consider both

cheers

Will post pics sunday. They look like Kombi seats .. no rips good conition from memory

do you have a decent pair of 2 litre heads??
cheers

mm dunno .. I have some on dead engines but who knows if they are descent. Would not sell them with confidence but I would say no ..

Hey Brad

I need some rust-free donor floor sections for my 69 Kombi resto

I need two sections around the floor mounting plates for the middle seat, and probably two bits where the seat belts mount

PLease let me know if you have any vans that you are prepared to cut up, and what the dollars will be

Need them soon as the van is in for rust repairs now

Thanks, Josh

hey brad,
im looking for some interior panels for my 74 panelvan, you got anything for me?
regards,
Danielfish

Do you have a left hand mat that fits under the seats?

As seen here: Clicky Click

Mine is ripped so I am after a replacement, they are $140 new for a set but that is a bit much to pay seeing as I only require the one.

any chance of a early bay drivers side rear corner if you are cutting one up thanks

Hi Brad....

Have you got any sliding windows??

Cheers

Dozza

Hey Brad
I'm after a full set of hood lining bows for the subibus
if you have some let me know how much
thanks
Bob

E-mail sent.
-Staggers.

Brad, 1800 cranks and rods. Cheers

Hi Brad

Im chasing the accelerator pedal and linkages for a 75 Kombi

Also maybe interested in some front seats if you have any

Thanks

Allan

Jb4845 – yep I have some of them, or at least I can cut some for you - $100 plus postage
ColumBUS – I have some rear trim, nothing from a panel as they didn’t come with them. I would have trim from non panels as far as rear trims and door trims – Let me know which ones you want.
Hallph – I will have a look, most seem to get tossed, if I do have one that is worth posting you can have it for $10 plus postage. Will check today and take pics
Beerboy – No early bays at all. Lge tail light only
Dozza – No rear sliders, I have some aftermarket louvers but no sliders.
Kombibob – I will have a look, ring Dan he had set from last time he was gunna do the subie bus.
Craig – I have an 1800 engine for you …. When you gunna pick it up ??
SVNWGN – yep I have linkages for a 75, they are Z pin style , yeah ?? is so complete assembly – Pedal, linkages, pins etc $20. Seats .. front bay I will take some pics of what I have.

Mag Wheels with 205 / 55 / 16 tyres at about 70% on them, 4 of em al matching with air brushing as shown.



rear kombi trim, don't think I have any matching panels and the vinyl has fallen of passengers side rear panel.


Kombi rear seat - have a few oth these, all look the same


Kombi roof lining, complete, no rips but does need a clean.

Hallph pics for you .... it is in good nick, has a few small holes where the seat sits on it.

hey brad could you u2u me dans ph number or email address?
can't seem to find them.
thanks
bob

That is the accelerator assembly I am after, how can I go about paying for& collecting from you??

Also, is it possible to get pictures of the air conditioner you have and is it everything that is needed to fit air con or will other parts need to be sourced?

Thanks

hey brad I am after the headlining, and interior panels for 74 kombi so if no one has already grabbed them, can I pop in and give you the money this week? (don't care about falling off vinyl or mould ) also do you have the card/panel bit that goes in front of pedals etc..

any seatbelts in reasonable condition.....

Need a full set for the raer of a microbus

[ Edited on 14-5-2006 by Dozza ]