Board Logo

48mm Dells and SSC box with ZF
noslug - June 28th, 2006 at 09:42 AM

This stuff is in NZ.

Anyway 48 DRLAs, new unported manifolds, hex bar linkage, K and N aircleaners. Very clean nice carbs. Comes with
3x sets vents 38,40,42
4x sets idle jets 60,65,70,75
11x sets mains 155,160,165,170,175,180,185,190,195,200,205.
5x sets of Airs 160,170,180,190,200

Also 2x partial rebuild kits, spare heim joints for linkage, 2x accel pump diaphragms.

$1800 NZ (about $1620 AU) for the lot (plus freight)

Also a SSC gearbox, stock gears, 3.88 r and p and a ZF LSD. T1 outputs, and Berg intermediate mount. $2500 NZ plus freight.

Im away for the next 5 days but will respond as soon as Im back


gull - June 28th, 2006 at 10:43 AM

single side plate ? gear box


56astro - June 28th, 2006 at 08:30 PM

Single Side Cover

you say tomata, I say tomato

:lol:


62ragtop - June 28th, 2006 at 11:48 PM

if you wanna sell only the LSD, i am interested.


humpty - July 2nd, 2006 at 01:09 AM

Cheers Gull for jumping on this for us mate.....

NOSLug....I'd be into that tranaxle if you could give me some more info when you return..... plus if you could work up a price shipped to Fremantle WA.... Cheers....


seagull - July 2nd, 2006 at 01:40 AM

Sea Gull
sea gull
Sea Gull

:rudolf


noslug - July 3rd, 2006 at 12:41 PM

Emailed but incase you dont get it. Trans has done about 15 passes down the 1/4, and about 2000 miles a year street use. No breakages in this time, apart from CVs. I have used it with a light (stage 1 kennedy and daiken disc) clutch set up and never had slicks on the car. Gearing made it a 3 gear 1/4 mile, with 205/60s it pulls about 100mph @ 7k in third.


humpty - July 3rd, 2006 at 02:04 PM

Cheers Adrian... I have reply to your email.....


noslug - July 6th, 2006 at 07:21 AM

Gear box is sold (once extracted from the car)...

Any interest in the carbs ?? Tell me if you think Im asking too much, they look pretty sharp on the garage shelf anyway !!