Board Logo

fs 1800 engine
wiseoldub - July 5th, 2006 at 07:50 AM

seller- wiseoldub -josh
location-west of byron
price -$400
condition- ok running
contact- 0414 726194
will swap for shit for my 63 ute, ie rear valance, headlights, etc

wiseoldub - July 6th, 2006 at 07:16 AM

have heaps of spare 1800 bits as well[except heads] that can go with it. gotta raise funds for the panel!
offers anyone?
cheers josh

airlekombi - July 7th, 2006 at 11:23 AM

jish - got a 73 kombi - with 1600 - the 1600 is fritz - will this fit in without too much trouble - what tinware etc will I need to get?

wiseoldub - July 9th, 2006 at 10:27 AM

it should bolt straight in with the gear i've got here!. i have the extra tinware and a new standard german exhaust [price that new!] you may have toswap your clutch over but from memory they are both compatable![1800 and 1600] but i will throw in both to make sure! how is airlie these days? i used to be bosun on the solway lass operating for southern cross sailing adventures about 4 years ago! was there for 2 years or so! loved every minute!! there is a guy in mackay that does dubs too! not much of a talker to start with , but a great bloke when you get to know him!! talk about aus history and planes and u will be there all week!
cheers josh

barls - July 9th, 2006 at 08:37 PM

i use the 1800 flywheel on my t4 in my bug. so thats to a standard 1600 box

barls - July 9th, 2006 at 08:49 PM

no the 2L will not fit with out clearancing the bell housing which would leave it extremely weakened.

wiseoldub - July 13th, 2006 at 11:23 AM

price drop!!! now $300 , as its annoying me now! its taking up room and i would rather sell it than move it into my new workspace!
anyone?
cheers josh

wiseoldub - July 16th, 2006 at 08:47 AM

just got told that my add reads like the engine is incomplete. not so. one engine is all together and one is bottom end and bits and pieces! just thought i should add that little detail to help things along a bit!!!
cheers josh
0414 726194

wiseoldub - July 19th, 2006 at 07:21 PM

bumpity bump

bond - July 19th, 2006 at 08:59 PM

try airlekombi

wiseoldub - July 29th, 2006 at 09:01 AM

can bring down to valla if needed!! only as sale as i think i will be in my wifes caravelle and not my old panel that is more suited to parts haulage!!
cheers josh

wiseoldub - July 31st, 2006 at 05:51 PM

offers?

Softop - July 31st, 2006 at 06:15 PM

What did the motor come out of Josh.

I need to ask my mechanical genius if it would fit into my '68 Beetle?

barls - July 31st, 2006 at 06:23 PM

it would be a t4 1800 ie out of a kombi. it will bolt in but will need to be converted to upright. its a nice size for a bug as it doesnt require an engineers. i would had one of these instead of the 2L if i could of found one at the time

wiseoldub - August 2nd, 2006 at 06:15 PM

motor came out of a kombi, 76 i think. wont go into a beetle without a conversion from sherman[plug]!
i think this may be sold!
cheers josh

[ Edited on 2-8-2006 by wiseoldub ]

Softop - August 2nd, 2006 at 09:16 PM

OK, I'll keep an eye on the thread for updates anyway.

tassupervee - August 3rd, 2006 at 09:02 PM

Quote:
Originally posted by wiseoldub
have heaps of spare 1800 bits as well[except heads] that can go with it. gotta raise funds for the panel!
offers anyone?
cheers josh


A M8 of mine is after a pair of 1800 carbs if there are any available.
L8tr
E

Takhoal - August 3rd, 2006 at 10:56 PM

Quote:
Originally posted by wiseoldub
motor came out of a kombi, 76 i think. wont go into a beetle without a conversion from sherman[plug]!
i think this may be sold!
cheers josh

[ Edited on 2-8-2006 by wiseoldub ]




yup, sold, Josh, DD done mate, enjoy valla

wiseoldub - August 4th, 2006 at 06:58 AM

there are some at a local wreckers thast look great too! can't be much. i will look into it!