Board Logo

type 3 parts cheap and good - make me an offer - SYD
type3lover - July 14th, 2006 at 06:41 PM

Seller: Toby

Location: Dural, Sydney, NSW

I have the following type 3 parts ready for immediate sale:

Ball joint front beam complete with torsion bars, trailing arms and excellent near new ball joints all good nick: $130

Steering box excellent condition no leaks with good tie rods and tie rod ends: $100

Swing axle gearbox in good order: very good but not perfect complete: $75 - u remove it otherwise $120

Rear swing axle suspension $90

Back seat (wagon type) beige colour no tears: $40


Fuel tank immaculate condition recently sandblasted and powdercoated gloss black (not for EFI): $125

Gear shifter short throw very good condition: $25 (SOLD)

FRONT bumper with overriders chrome ok: $50 (SOLD)

Solex 32pdsit twin carb kit only done 46000 miles and recently had new kits done with all linkages, manifolds, balance tube, air cleaner to suit type 3: $180 (SOLD)

Globe Bathurst mag wheels set of 4 - 14" x 6" good condition with dunlop monza front tyres 85% tread, rears legal but could do with new rubber came off late 70's beetle: $200 (Sale Pending) Now SOLD!

NOW ADDED:---

Squareback carpeted panel behind seat as well as rear boot carpet with rubber mat slightly cracked but covered by carpet looks new grey colour $40 (SOLD)

Front bumper no overriders great nick $50

Complete wiring looms in good condition $40 (GONE)

Brazilian fuel pump $15

I can take photos if you like.
Will ship within reason at buyers expense.

Thanks for looking and I hope I can help you with your VW!

Cheers,
Toby :thumb

I also have a new cal look windscreen seal at:
http://forums.aussieveedubbers.com/viewtopic.php?tid=54296 

There is more, and I may start a new thread soon, but seriously just make a offer on these parts. No junk just good stuff!



[ Edited on 7-8-2006 by type3lover ]


type3lover - July 14th, 2006 at 07:45 PM

Starter motor $60
Generators 14V 30A x2 $70 for the reco one (done 21 miles!), $50 with new brushes and no bearing play
If you want the body it's free (if the popout pillars do not sell first - rust in the usual areas but no accident damage.
Also have a few panels such as front right guard, both rear guards free.
** Rear guards are gone**

The pan has no rust holes - had a new panel welded to the rear right section but otherwise it's original. FREE!

I'm open to sensible offers for all parts.

[ Edited on 29-7-2006 by type3lover ]


dak002 - July 14th, 2006 at 07:45 PM

Early or late?


type3lover - July 14th, 2006 at 07:47 PM

Early - 1967 / 1968 parts


type_one - July 14th, 2006 at 07:58 PM

Got any pics of the guards and the bumpers.


type3lover - July 14th, 2006 at 08:15 PM

Will try to arrange pics this weekend. Any photo requests besides guards and bumpers?


Dozza - July 15th, 2006 at 07:52 AM

gear box any good?? u2u me

Cheers

Dozza


NCH-003 - July 15th, 2006 at 10:11 AM

Interested in the Shifter could you U2U me some pics?


gtl1955 - July 16th, 2006 at 09:38 AM

I'm really interested in the mags. WIll they fit a 1970 Type 3 Fastback. I notice the current tyres and wheels on my car are 165SR15. Can you post some pics please

[ Edited on 15-7-2006 by gtl1955 ]


type3lover - July 16th, 2006 at 02:31 PM

Shifter is sold.
U2U sent to gtl1955 re mags.


NCH-003 - July 16th, 2006 at 03:29 PM

Thanks!!!!!!!!


HotRodMatt - July 16th, 2006 at 06:48 PM

Quote:
Originally posted by type3lover
Also have a few panels such as front right guard, both rear guards free.



Interested in rear guards regardless of condition.


type3lover - July 17th, 2006 at 09:20 AM

HotRodMatt - U2U sent re guards.


SirDelton - July 17th, 2006 at 12:24 PM

Hi Type 3..
Can you please send me a photo of the fuel Tank?

mrdelton@bigpond.net.au

I think it is a Type3 Tank in my kitcar..

Cheers
Darren.


type3lover - July 19th, 2006 at 12:58 PM

Darren - email sent. Sorry about the delay mate.

Pics to follow...


type3lover - July 19th, 2006 at 01:10 PM

Back seat...

[ Edited on 19-7-2006 by type3lover ]


type3lover - July 19th, 2006 at 01:30 PM

front bumper...just needs a polish

[ Edited on 19-7-2006 by type3lover ]


type3lover - July 19th, 2006 at 01:32 PM

front beam & steering...

[ Edited on 19-7-2006 by type3lover ]


type3lover - July 19th, 2006 at 01:35 PM

fuel tank...


type3lover - July 26th, 2006 at 06:04 PM

Guys I still have most of this for sale.
Prices are a guide only. U2U if there's anything you're interested in...
I am very flexible with prices!
Sales are pending on wheels & fuel tank.
Cheers, Toby


type3lover - July 26th, 2006 at 06:18 PM

Duh I forgot to mention these:

- 2 x 12V wiper motors complete $15 each
- 4 bumper overriders $5 each
- pedal assembly $15
- 3 x handbrake cables ( 2 are good 2nd hand, 1 new in plastic) $25 for the lot (New one SOLD)
- set of 5 std rims with tyres $50
- fresh air vents w/ controls $10
- cooling fan w/ housing $10
- pair tail light assemblies $15
- pair bullet indicators & mounts 1 lens is cracked $15

There's more but you get the idea! Photos can be arranged.



[ Edited on 30-7-2006 by type3lover ]


type_one - July 27th, 2006 at 11:49 AM

Mate I am interested in the front bumper and possibly a few other bits and pieces. Will you be around on the weekend?

Whats your phone number to ring you?


type3lover - July 27th, 2006 at 11:53 AM

Just U2U'd my number type_one


type3lover - July 29th, 2006 at 07:06 PM

Front bumper with overriders now sold.

Prices lowered and more added above.


HotRodMatt - July 29th, 2006 at 07:54 PM

Thanks for the guards. They'll stitch up with what I have to make a cool set.


Free bump for the most honest descriptions of condition of parts I have seen in a long while.


simoninoz - July 30th, 2006 at 09:42 AM

Hi I'm interested in some things, can you send me your number please, Ta


type3lover - August 1st, 2006 at 10:17 PM

I still have these parts for sale:

Starter motor working great before removed 2 weeks ago $ 60

Generators 14V 30A: 2 available
First is reconditioned (21 miles ago!) with new bearings, brushes, commutator renewed on a lathe and mic'ed, all checked over with late push on connectors as new $70
Second is same unit with the early eyelet connectors. History unknown but zero bearing play and looks like there are renewed brushes and good commutator $50

Voltage regulator to suit VW generator new brazilian $20

Complete front end with steering box & straight tie rods & new balljoints - all nice and tight $200 cheap!

Complete rear suspension with good gearbox (swing axle) incl thicker s/w torsion bars (which are perfect to stiffen up your notch or fasty). This is the complete rear assembly minus the motor. $200 for the lot

VDO temp gauge 0-150 $18

VDO oil pressure gauge 0-1000kpa $18 - best if you are running a high volume oil pump such as 30mm

VDO oil pressure sender to suit gauge shown above $12

Bumper bar early type 3 straight but needs a polish $50

Brosol brand fuel pump good $15

Windscreen (tinted) $20

Front & rear wiring looms $25

Heater boxes complete x2 $40

Fan, housing and most tinware $30

Original vac advance dizzy needs new points pivot shaft otherwise good and working $25

Windscreen seal cal look new $60

Early bonnet bit rusty around the nose $10

Back seat beige colour no tears $40

FREE body and FREE pan. Body rusty, pan quite good.

Various other good bits like boot bonnet & door catches, shifter coupling, fresh air vents, lots of small parts too much to list.

Please U2U for anything of interest...

Cheers,
Toby :thumb


gtl1955 - August 1st, 2006 at 10:21 PM

Mag Wheels - Can you check U2U please


gtl1955 - August 1st, 2006 at 10:32 PM

check your u2u


type3lover - August 7th, 2006 at 12:16 PM

Wheels are SOLD...still lots of goodies up for grabs!