Board Logo

WTB: 69-on Beetle ball joint front stub axles
VWCOOL - October 11th, 2006 at 09:32 PM

Like the sign says, I'd like to buy bare standard BJ front stubs. Maybe someone has some lying around on a bent front beam... Discs, tierods, trailing arms not really required but heck, I'll take 'em if I have to
U2U if you have any...

Prefer Sydney/Newcastle area so that I can pick up easily

[ Edited on 11-10-2006 by VWCOOL ]

Craig Torrens - October 11th, 2006 at 09:37 PM

I have some........................case of crownies in the fridge thanks :thumb

VWCOOL - October 15th, 2006 at 09:05 PM

*BUURRP!*

bump!

VWCOOL - November 8th, 2006 at 10:44 PM

...and again. Anybody got any?

MikeM - November 8th, 2006 at 11:35 PM

What craigs ones not good enough?

VWCOOL - November 9th, 2006 at 10:42 AM

Yeah they're fine, but I need as many as I can get as 'cores' for my vented big front brakes conversion (so I can offer same-day exchange) preferably without pulling our own cars apart


[ Edited on 9-11-2006 by VWCOOL ]

matara - November 9th, 2006 at 12:05 PM

I have a pair of complete front hubs, everything from the dust cap, disk, caliper to the spindle. Is that what your after?

Cheers

Steve

VWCOOL - November 9th, 2006 at 01:09 PM

Quote:
Originally posted by matara
I have a pair of complete front hubs, everything from the dust cap, disk, caliper to the spindle. Is that what your after?

Cheers

Steve


really only need the stubs - the remainder is replaced - but will take all if it's easier

VWCOOL - December 15th, 2006 at 09:20 PM

Bumpsies...

555bug - December 15th, 2006 at 09:56 PM

i've got a pair, in Brisbane though.