Board Logo

FS: 1835 long block (sold)
bond - October 18th, 2006 at 02:38 PM

motor complete minus exhaust and carbies.

as41 case, 92mm pistons and barrells, reco stock 1600 heads, stock crank, forget the cam, all tinware and reco genny - go's hard as, compression is around the 9:1 mark from memory. will need to be stripped and done over with new seals as had oil leaks. was in car, have pulled it with intentions of doing oil leaks but could not be arsed.

$900

nick
0422721253


[ Edited on 22-10-2006 by bond ]


bond - October 18th, 2006 at 05:39 PM

:thumb


bond - October 18th, 2006 at 10:36 PM

would like this gone by the weekend - make an offer

nick


type3vw - October 19th, 2006 at 12:39 AM

does it have carbs or is it just a long block????


bond - October 19th, 2006 at 07:15 AM

i have rekitted weber dcn40s on short manifolds with a swivel linkage and a berg one on its way

ta

nick


bond - October 19th, 2006 at 03:57 PM

also have a phat boy exhaust and 1 5/8 merged header........


aintgotitmusthaveit - October 19th, 2006 at 06:23 PM

U2U sent


bond - October 19th, 2006 at 07:16 PM

did not get u2u my good man

nick


aintgotitmusthaveit - October 19th, 2006 at 09:06 PM

Nick
try again.U2 U sent.


bond - October 20th, 2006 at 11:53 AM

still here - will sell complete with carbs and exhaust

ta

nick


bond - October 21st, 2006 at 11:00 AM

bump for saturday


bond - October 22nd, 2006 at 06:26 PM

sold

thanks

nick