Board Logo

early 1100cc VW engine f/s brisbane
TheMiniMan - December 18th, 2006 at 12:42 PM

i`ve advertised this before at @ $200 but got no one interested, it has been built up thru Radek & Bob at East Brisbane engineering years ago, rings, bearings, heads machined & valves done etc, even had the original 6v generator overhauled at Mackey electrical too, but when it came time to fire it up, it had a slight knock,,, seems to be the heads need a bit more machined off as it sounds like a piston is hitting a head. we ran it for about 3mins & turned her off, so shoyldn`t be too hard to fix.

so, Maybe $100, come & take it away,,, all original tinware, exhaust system etc etc etc

ph 0407 135 656 --->located sth side Brisbane, near Gateway bridge.
Matt


bushed - December 18th, 2006 at 08:46 PM

any pics matey??


cram - December 18th, 2006 at 09:26 PM

sent you a u2u


Andy - December 19th, 2006 at 12:12 AM

Does it still turn over OK? Nothing siezed/bent etc?
Cheers


TheMiniMan - December 19th, 2006 at 12:41 AM

It`s all complete & turns & actually runs,,, just has a tick/knock & i believe it to be a piston tapping one of the heads. is`all.
I`m doing a shed clean out & need it gone, it owes me,,,, well you don`t want to know what it owes me,,, $100 for it is nothing :-(

& yeah i have pics here somewhere, i did post pics a few months ago but no one seemed interested,,, i think everyone was on drugs that week tho :-)

ph 0407 135 656, bring $100 & grab it. the big round muffler looking thing has to be close to worth that alone don`t it??? Dam i spent $200 overhauling just the generator... the heads cose quite a few cartons of beers (like mega lots of beer),,,, dam someone had better come around & take this thing before i chuck it!!!!!!!!!!!!!!!!!!!!!!!!!!


Robo - December 19th, 2006 at 05:44 AM

Ill Take it, if its not gone.
Rob...


VWFOOL - December 19th, 2006 at 08:29 AM

do u know wat year its from?


Robo - December 19th, 2006 at 12:01 PM

Its in my shed now next to the 56!
Rob...


jason1957 - December 19th, 2006 at 10:01 PM

Damb always too slow!!! What a bargin:tu:


TheMiniMan - December 19th, 2006 at 10:59 PM

yeah Robo grabbed it, thanks man, i know you`ll fix her up & use it the way it`s meant to be.

I also have some off road wheels here, 2 of them are 15"X 8" beetle offset
another 2 are kombi offset also 15"X8"
& 2 others that are Peco Stars but are fitted with sand gripper tyres, SERIOUSLY GOOD SAND TYRES!!!!!!!!! with good tread & road legal +++
again $100 for the lot,,, now how cheap is that???????????????????????????????????

There is also an early split window steering box if anyone wants a spare $100

& also a bay window read seat---the middle one $40

now come & get these things before they go to the dump

ok?????


Andy - December 19th, 2006 at 11:29 PM

Good onya Robo :thumb

Miniman, whats the kombi read seat?


TheMiniMan - December 20th, 2006 at 11:15 PM

oops,,, "Rear" seat goes in the middle of the back floor, has the side bit that folds down to let you get to the "BacK/rear" seat.

sorry, wissh i cud spel proper :-)


phatratpat - December 20th, 2006 at 11:20 PM

whats the vinyl like any rips etc ?:smilegrin:


Andy - December 21st, 2006 at 12:19 AM

Hehehe. Das Oke.

If it's black, I'm keen!


TheMiniMan - December 22nd, 2006 at 12:21 AM

t5hink there`s a slight rip in the back of it,,, the front is fine tho

& i can paint it black :-)

It`s actually white/beige tho