- Coil over shocks x 2. Unknown condition. $30 the 2.

I'll have em Chris.

u2u.

[ Edited on 2-1-2007 by sinecure ]

no worries. Am yet to recieve u2u, but its on hold for ya Mick. drop me a line to negociate a time :thumb

can you post a pic of this

- 2 x chrome bumper mount blade things. Chrome german styling without bumpers. Its those things that stick out. Need a little polish. $25 the 2


ta nick

u2u about wiper motor sent

yup. recieved. Yeah derek, i'm not too sure whether the whiper motor is 12v or 6. the 1300 was running on a 12v battery and 12v conversion setup, but the 1300's were also 6v originally. Best if u have a quick look.

I will test the motor out tomorrow to see if its any good. i took the cover off... although the whiper motor is dirty on the outside, shes nice and clean on the inside.

regards,
christopher.

will get a photo within 24 hrs nick of those 'things'.

If i remember right, u had a photo on the forum here of a nice bug for sale, that had em sticking out from where the bumper mounts usually come from. if i remember right.

but will get photo.

sound like T bars
my black beetle has had a set for the last 20 or so years but im pretty sure theyre illeagle now
cant find any pics where they're still fitted but heres the bug selector of it
are these the thingys chris?

yeah - i thought either those or the tops of towel rail bumpers? hence wanted a pic

ta

nick

yeah mate, its those t-bars...
lol, i can't blame em for being illegal.. they look dangerous :o hehe

but yeah, i only got 2 of em... they are straight...

u2u was not my friend. Had some trouble but finally sent Chris. I'll call you in the next couple of days.

Cheers,

Mick.

[ Edited on 2-1-2007 by sinecure ]

Photo of the T - Bars.

guages

pile of crud that was sealed under my watertight tarp.
exhausts, airshocks in that photo too, misc... etc.
All that is for sale is int he original post though. Not everything under the tarp

k&l front end front bar. I have the other mounts that go with it elsewhere in the tarp.

heater boxes. They got flaps, its just these 2 i got, not the rest of the exhaust to go with that will fit. They look ugly, but still are solid, heavy buggers that seem to be in working order. no holes that i'm aware of.

note: am willing to trade / swap generously for baja barwork, prefilters for donaldson airfilters (2.5 inch opening), rust repair panels, rust repair labour, 4 stud offroad rims or wheels, strengthened tie rods, kombi gearbox mounting kit, motor upgrades for 1500 single ports etc. etc.

If you have any of what i have mentioned, but not satisfied with what i got to offer, i might part for a combination of trade and $, depending on wats negociated.

regards,
christopher.

Twin cannon exhaust with welded hotdogs. Sounds great. Needs a little straightening. $35

+

Extractor street exhaust. Rusty but no holes. Complete. Suit 1300 motor or larger. $40


Whats the condition of these 2 items??
any pics??

And postage to sydney area.. woudl ti be difficult? Thanks mate

- Baja front barwork. With spotlight mounts. Suit k&l front beam. Its all there, straight and strong. $65

^^Interested in this Chris. Prolly not gonna have the money for a week or so tho. Dibs if it's not sold by then. :thumb

hi esevwbits.

the condition of the items are alright. they are ready to bolt on and go. but... they could do with a bit of surface treatment. they are a little ugly. no holes though, just surface rust and old paint etc and marks + the hotdogs welding isn't too spectacular.

will get photos for ya in say the next 48 hrs, hopefully tomorrow though, but i got work. will see. Too be honest and upfront, the street extractors work the charm, my 1500sp screwed nicely with those ones on and ran well (screaming probably cause there was no muffler lol). the offroad extractors, to make them look prettier would require either panel beating, or a single cut/reweld.

The offroad extractors, the only place they need cutting / re-welding is only on one of them, and is where all the tubes meet the hotdog muffler. the muffler, where its welded with the extractors is the rough spot. But the physical roughness (although not a necessity to fix) is between the hotdog the the end of the extractor tubes. the extractor tubes themselves are fine from memory.

I am not sure what engine the offroad extractors are made to perform well on. they do fit a 1300 upwards. i got them off a 1300... but never had a chance to see them go. i put them on my 1500, and after trying it with another set of twin cannons , they seemed to make the engine alot gutless then the set i'm keeping. The extractors look fine, no holes (mind you, i didn't have gaskets on at the time), i'm just assuming that the poor performance with them on my 1500 was due to not being on the right engine for it. I personally think its a lack of back pressure, possibly from me not having gaskets on... (broke all my other ones, were rotten lol)

Now, sorry for the babble, but i thoght i would be honest. Postage should be alright. Will add to the price, but packaging them up shouldn't be tooo bad. I'm willing to give it a go.

best regards,
christopher.

Blackbug, there all yours man.

I don't mind waiting.

Any chance of a pic of the radio ? if you've still got it of course--,
Cheers , Al .