Board Logo

WTB "30pict 2" to "34 pict 3" adapter
aintgotitmusthaveit - February 27th, 2007 at 05:53 PM

HI everyone
Been told that getting the manifold out is a bit o' hard work. Someone suggested an adapter plate for the increase pitch and throat on the 34 pict 3 carb.

Anyone got one in melbourne?

Samblers - February 27th, 2007 at 11:10 PM

If its the one for putting small carb (30 pict) on big manifold (34 pict) then i got one... its in Perth though

Sam

samandkelly @ googlemail.com

aintgotitmusthaveit - February 27th, 2007 at 11:25 PM

Just to clarify. I want to put the bigger carb on the smaller manifold.
Thanks anyway Sam.

vw54 - February 28th, 2007 at 06:01 AM

they available new from Vintage in sydney 02-9789-1777

Anthiron - February 28th, 2007 at 10:18 AM

i bought one of the plates that allow you to put the 30mm carb on the twin port manafold however they dont work backwards......are u sure they make them for the otherway around? make sure u know what ur buying before u pay money.

Nicko

aintgotitmusthaveit - March 2nd, 2007 at 11:44 PM

thanks guys, decided to swap the manifold instead!