Board Logo

WTB: 4 stud Type 3 rear drive flange
1303Steve - February 27th, 2007 at 10:05 PM

Hi

I'm after one 4 stud Type 3 rear drive flange, does anyone have one?

Located in Sydney 0439 133 354.

Steve

VWCOOL - March 1st, 2007 at 10:54 PM

No luck?

1303Steve - March 2nd, 2007 at 12:24 AM

Hi

Not yet, I won a set of type3 rear brakes on EBay with no centres, I have one. I'm going to to fit them on the 74 1303.

Steve

seagull - March 2nd, 2007 at 12:27 AM

I have 2 of these mate if your in more shit than the first setlers

seagull

seagull - March 2nd, 2007 at 12:28 AM

I could send them with the adapter plate & fly wheel I have here for those Torens bros

:starhit:

1303Steve - March 2nd, 2007 at 12:31 AM

Hi

Thanks, that would be great, what do you want for them?

Steve

seagull - March 2nd, 2007 at 01:05 AM

I think I payed $50.00 for the two Steve

I see if there still in the work shop here , dam silly to send some thing like this all the way accross our great land .

seagull

avwboy - March 2nd, 2007 at 11:42 AM

hey steve if u want a freebie drop by the shop some time
least i owe ya for all those chats about ya car over the last few yrs

dangerous - March 3rd, 2007 at 05:26 AM

You will have to turn down the diameter Steve, no?

If so, you can use 4 stud drums with the excess machined off to get the same result.

VWCOOL - March 3rd, 2007 at 10:55 AM

Quote:
Originally posted by dangerous
You will have to turn down the diameter Steve, no?

If so, you can use 4 stud drums with the excess machined off to get the same result.


Dave, Steve is using the hubs inside standard Type 3 drums for a 'simple' upgrade but yes you are right, quality drums (German one, not Brazil crap!) can be machined into drive flanges for discs etc

1303Steve - March 4th, 2007 at 04:41 PM

Hi

I'm just doing a few things on my new daily driver to make it a bit better, it will be my sons 1st car in November 2008.

AVWBOY, I will take you up on your offer.

Steve

avwboy - March 4th, 2007 at 10:24 PM

np steve , ill leave it in the shop with mum incase im on the road or not in the workshop when u stop by :)

1303Steve - March 29th, 2007 at 09:20 AM

Hi

Thanks for everyone's help, I picked it up from Volksbahn yesterday and had a chin wag with Nic and his mum.

There are still ladies & gentlemen in the VW industry.

Steve