Aussieveedubbers - Powered by GaiaBB

FS BNE - Heavy Duty 3 x 2 trailing arms

Brad - March 18th, 2007 at 02:35 PM

Name : Brad
Location STAFFORD
Item - Pr of Heavy Duty Custom Offroad Trailing arms. These are the old design but still use the same hubs and bearings.

These are complete with XF disc calliper backing plates, setup with machines kombi hubs and axles.

Selling due to a change in plans.

Price $600 ono

Click on link below for more info.

Contact - PM

http://offroadvw.net/buggybrad/rear_trailing_arms_and_disc_brak.htm

seagull - March 18th, 2007 at 03:10 PM

off road use only ? test report for ADR included ?

VWCOOL - March 18th, 2007 at 07:23 PM

I reckon an engineer would okay those for road use, subject to vehicle track etc etc considerations...

free bump

Brad - March 18th, 2007 at 09:16 PM

Quote:

Originally posted by seagull
off road use only ? test report for ADR included ?

Do you even know what that means ??

If I actually thought you were interested in buying them I would answer the question but since I know you are tyre kicking I will not waste my time.

Oh and in case anyone is actually wondering I actually have these items unlike most things Seagull aka gull aka neil pretends to sell.

If anyone is genuinely interested then feel free to contact me and yes you can use them on a Road Registered Car.

seagull - March 19th, 2007 at 01:17 AM

Brad I was interested as there is a guy on here Mike D looking in increase his wheel base on a road going car with a mid mount wrx in it , mike is away & is looking to do the above to conform to the ADR for this part .

I thought you were a welder ? or was that an engineer >shit you told me on the phone you were in the army

Brad nice way to sell your gear mate

aka Seagull

humpty - March 19th, 2007 at 11:37 PM

They look liked they widen the track as well as lengthen the wheelbase ("3x2") Neil.... No good for Mikes car if he's gonna use the OEM pick-up point.... But since his car is a tube chassis car (it is right?), he could put the pivot where he liked!!!

t3lambo - August 16th, 2010 at 05:33 AM

Hi Brad. I am interested if you still have them, can you pls call me +61424 249 831 john