For Sale is my set of new and unused BTR wheels.
They measure 15" x 4" times 2 for the front
And 15" x 7" times 2 for the rear.
They are still in the box and have never been fitted,, well I took em out for this photo shoot.
I got em for my bus project but decided on Fuchs so they are for sale for what ive got in em. Which is $1300.
Because of the large offset they wont just straight bolt on to a sedan or bus and fit inside stock guards.
SOME narrowing of the suspension will be needed, or guard flaring!
But they will go straight on a Buggy or Baja.
These are seriously tough and lite wheels , currently used on many machines to run the Baja 1000.

Be the first to run them on a street car in OZ!

I am in Perth, local pickup is ok or I can take them to a courier for you eastern staters if needed. All freight is your cost though.
My email is
choppaxs@hotmail.com for any questions.

Thanks

Mark





[ Edited on 15-4-2007 by choppa ]

[ Edited on 30-4-2007 by choppa ]

So they won't fit onto a short axle rear end (i.e. 58 beetle) without narrowing the rear?

Nope, not under stock guards anyways. The rear will need about 3 inch narrowing each side for that.
The fronts, id guess a 4 inch beam would be enough.
I think that red 15w had a 4 inch beam in it and the wheels tucked nice.
Im guessing itd be about the same on the front of a bug.

[ Edited on 15-4-2007 by choppa ]

Never seen those wheels before...Look great!

gorgeous

Bump

$1200 new price.