Board Logo

[WTB - Sydney] type 3 drive flange
J&SBlue - April 23rd, 2007 at 04:29 PM

I am in need of one type 3 rear wheel drive flange that has good splines. If anyone has one they want to sell then please contact me.

U2U's dont work for me so either
email : mark@pa.com.au
mobile : 0411 688 929

Thanks.

bushed - April 23rd, 2007 at 09:47 PM

i'd like to help is it s drum (splines) and if so is it a 4 or 5 stud
or post up or me a pic
have rear drums for a 72 and earlier

J&SBlue - April 24th, 2007 at 09:58 AM

Thanks bushed.

I am not after the drum, I am after the drive flange that bolts onto the rear stub axle. On a Type 3 the drive flange with the splines is seperate from the drum.
This is the best I can do for a picture. It is the clean looking piece in the middle that the 36mm nut bolts up to that I am after.

http://www.pa.com.au/tmp/buggy/brakes.jpg

bushed - April 24th, 2007 at 02:12 PM

no go, but will keep emm peeled 4 u

cheers

bigdave - April 24th, 2007 at 04:16 PM

Hey buddy

I have one of those spare in good cond. Will email u

Cheers

Dave

J&SBlue - April 24th, 2007 at 04:18 PM

Excellent. I am sitting here waiting for your email. :thumb :-)

bigdave - April 24th, 2007 at 04:25 PM

Email sent.