Board Logo

WTD...Vanagon ignition parts
Stanley - April 26th, 2007 at 09:56 AM

I am chasing some ignition parts from a 1.9litre Wasser Boxer Vanagon engine. (I think)

Bosch PN :
0 237 022 045

VW PN :
025 905 205K

The Module should be a Bosch : 1 227 022 008 .

I know nothing about these engines I am just wanting to fit it to my beetle. This setup will be the same as Dave Butlers tried and proven setup. I'm over points.

send u2u, reply to post or email stanley111@optusnet.com.au

Cheers all

76camper - April 26th, 2007 at 04:57 PM

if you have no luck, there are aftermarket kits around... the compufire kit is pretty cheap at $100... once you go pointless you will never go back 2 points.

Stanley - April 28th, 2007 at 09:07 AM

anyone?

11CAB - April 28th, 2007 at 11:15 AM

You might want to try somewhere like Brooky Parts Plus

Stanley - April 28th, 2007 at 11:53 AM

Thanks Graham

BTW....anyone using the compufire?

tassupervee - April 28th, 2007 at 10:11 PM

If it matters, Im using a Pertronix 2 trigger and Pertronic Flamethrower coil in my Vee. The Pertronix 2 employs "smart" dwell control for optimum performance. Fires a fixed gap 2.4mm plug perfectly.Very happy with it.
Pertronix 1 is a fixed dwell, or "dumb" trigger but seem to work OK as well.
L8tr
E