Board Logo

Wanted parts to suit 54 oval
jhp1 - May 22nd, 2007 at 10:58 AM

#! Message No Longer Available !#

Turbo54 - May 22nd, 2007 at 12:59 PM

Good luck on the floormats, I think you can buy repro handles, other than that thesamba.com for the rest.
T54

vw54 - May 22nd, 2007 at 01:05 PM

the door and window winders are the only items perculiar to a 54 lots of luck with the floor mats

h - May 22nd, 2007 at 01:17 PM

hub caps are the same on early prob just the quality in chrome n thickness may differ however slightly.. good luck hey.. ive been collecting for years n are still looking for bits for my 54..

mat54 - May 22nd, 2007 at 01:33 PM

hi mate
can only join the que
i ended up manufacturing my own window winders ,chrome channels,handbrake cables,yet to make the latch that holds the quarter window in place........
nice model year until you start needing bits
dont wanna say what i paid for hearts and steeringwheel....

so good luck on the travels buddy
its all part of the fun
steff

mat54 - May 22nd, 2007 at 02:45 PM

ps i got a bonnet vw emblem

vwtyp2 - May 22nd, 2007 at 08:54 PM

some hubcaps have the logo stamped from the inside so that it is raised, some have the logo stamped from the outside so it iis imprinted.

bushed - May 22nd, 2007 at 10:11 PM

have collared window winders
hubbies
door handles (grooved)
and radio\

click my email and ask for pics

jhp1 - May 23rd, 2007 at 09:07 AM

#! Message No Longer Available !#

jhp1 - May 23rd, 2007 at 04:09 PM

#! Message No Longer Available !#

bushed - May 23rd, 2007 at 06:01 PM

press in the surround plasic ring and push out the little meatl retainer through hole use a small screw driver.

u gotmy pics??

u want radio to work /? 6v or 12v??

jhp1 - May 23rd, 2007 at 11:33 PM

#! Message No Longer Available !#

bushed - May 23rd, 2007 at 11:44 PM

mine are not done up or cleaned as u can see
but with a lil effort shouldcome good.

Blaupunkt will take a while and a few $$$ for us to find

jhp1 - May 23rd, 2007 at 11:58 PM

#! Message No Longer Available !#

Turbo54 - May 24th, 2007 at 09:30 AM

if you want original, don't put in a radio... never factory.
T54

jhp1 - May 24th, 2007 at 10:06 AM

#! Message No Longer Available !#

kombikim - May 24th, 2007 at 10:45 AM

Quote:
Originally posted by bushed
press in the surround plasic ring and push out the little meatl retainer through hole use a small screw driver.




that removes the winder handle from the regul;ator shaft I would assume you need to replace the the plastic knob on the handle itself,
- me too as the knob on one of my winders is about to disassociate itself from the handle (for the last 2 years) as far as I can assume only way I can do it is get a later model handle with a good knob And destroy handle to remove knob & little shaft it sits on, & peen it into my original handle after drilling the old shaft out of that.

Robo - May 24th, 2007 at 07:38 PM

I got this Blaupunkt for my 56. You could order the car (Oval) with this radio from the dealer. Or fit one later. This radio is period correct for my car.
Rob...

bushed - May 24th, 2007 at 09:21 PM

sho shweeeet

nice og colour on car too

[ Edited on 24-5-2007 by bushed ]

Robo - May 26th, 2007 at 07:17 AM

Have a look here. There is a good section on period radios for your car.

http://gutefahrt.com/ 
Rob...

jhp1 - May 26th, 2007 at 08:37 PM

#! Message No Longer Available !#

jhp1 - May 28th, 2007 at 09:25 AM

#! Message No Longer Available !#

dvs_vw - May 30th, 2007 at 09:44 AM

there is a 6v horn on ebay for $1.99 and 2 days to go if you haven't got one yet

jhp1 - May 30th, 2007 at 11:03 AM

#! Message No Longer Available !#

bushed - May 31st, 2007 at 11:00 AM

did u get nmy ice pic pics on e-mail

u got the heavy duty horn now ??