Board Logo

Going to Canada engine and parts sale*SOLD*
66deluxe - July 12th, 2007 at 06:34 PM

Hi all, with approx. three weeks before i leave for Canada to build jet engines for 3 months, i have decided to sell a few things. First up is a 1600cc type 3 engine and parts, the engine is only a shortblock, the case was thoroughly cleaned and crack tested by me at my work, no cracks were found and all dimensions are within tolerance, i had the case align bored 0.020"/0.50mm, the crank and rods were reground 0.010"/0.25mm by Crankshaft engineering and balanced, the rods were balanced end to end and new small end bushings fitted the pistons were also balanced. The cam i used is a Fuel efficient series from CB Performance with matching lifters, pistons and cylinders are new 85.5mm. Cylinder heads are also brand new original VW castings with 37x 33mm valves. I would like $1500 for the engine in short block form. Secondly i have a Whiteline front adjustable sway bar 22mm unit stock width, never used only fitted to my floorpan for mock up, $200 plus postage. Third i have a new 12 generator volt generator $250 plus postage. Please contact me via U2U or ring after 4pm please. I am in north Brisbane. Some photo's for you. Cheers Damo. Ph#0405464872
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild067.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild047.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild068.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild057.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild056.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild047.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild022.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild023.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild013.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild012.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild004.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild002.jpg
http://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild075.jpghttp://i31.photobucket.com/albums/c366/66glook/Type3notchbackenginebuild076.jpg

[ Edited on 22-7-2007 by 66deluxe ]

vassy66T1 - July 19th, 2007 at 08:10 PM

Hey
Does the whiteline bar suit a beetle or only the type 3
Pardon my ignorance.
Marcus

phatratpat - July 19th, 2007 at 08:22 PM

hey Damo pick us up some duty free booze will ya !:);)

66deluxe - July 19th, 2007 at 10:07 PM

Quote:
Originally posted by vassy66T1
Hey
Does the whiteline bar suit a beetle or only the type 3
Pardon my ignorance.
Marcus


It only fits a beetle there is one for a type 3 though. The swaybar is sold also. Damo

66deluxe - July 22nd, 2007 at 01:10 PM

All items for sale are now sold, thanks Damo.