Board Logo

[F/Sale QLD] 1off Complete Type 4 2litre [SOLD]
OZ Towdster - October 26th, 2007 at 07:07 PM

Seller ~ Andrew Westwood
Location ~ Alexandra Hills QLD
Price ~ $1800
Contact # ~ 0407373781
Item ~ 1off Complete Type 4 2litre ,This motor comes fully complete from 2ltr clutch to air cleaner as pulled from my wifes 77 Kombi and is also still available for a test drive till next thursday 1/11/07.It is also fitted with a nice extractor system and mufflers etc(sorry no heater boxs fitted for you southern folk so no heater) and has 1800 heads fitted for the bigger valves.
So if your looking to upgrade that old 1600 bay or just need a fresher motor this is for you and for a few extra dollars i'll even fit it for you (IF YOUR IN BRISBANE ONLY)
Once removed from vehicle i will also run a full compresion test and post results but from the recent Dyno day i should think they will be quite good considering it produced 52.4 rwhp


11CAB - October 26th, 2007 at 08:26 PM

I've driven this, and it pushes along a set of 33inch tyres very nicely. Are you sure its only a 2L Andrew?


OZ Towdster - October 31st, 2007 at 05:29 AM

Bump


Brad - October 31st, 2007 at 02:05 PM

I'll give you $500 if you fit it to my beetle


11CAB - October 31st, 2007 at 03:27 PM

Thats $500 for the fitting Andrew....on top of the $1800 purchase price.... :lol:


OZ Towdster - October 31st, 2007 at 05:33 PM

Fitting in a Beetle will require a Upright Kit too which i just happen to have and i'll let him have that as well for an extra $550


Andy - October 31st, 2007 at 10:20 PM

Will it fit a 411?
:smirk:


Brad - November 2nd, 2007 at 01:50 PM

Quote:
Originally posted by Andy
Will it fit a 411?
:smirk:


Yep but the tinware will be different


Andy - November 2nd, 2007 at 07:12 PM

Quote:
Originally posted by Buggy Brad
Quote:
Originally posted by Andy
Will it fit a 411?
:smirk:


Yep but the tinware will be different



Hehehe,
Loaded question mate, it won't fit mine :)
'68/'69 type 4 case is different.
Not that hard to modify to fit though.


Brad - November 3rd, 2007 at 10:52 PM

Quote:
Originally posted by Andy
Quote:
Originally posted by Buggy Brad
Quote:
Originally posted by Andy
Will it fit a 411?
:smirk:


Yep but the tinware will be different



Hehehe,
Loaded question mate, it won't fit mine :)
'68/'69 type 4 case is different.
Not that hard to modify to fit though.


Nothing loaded about it, take off teh tinware and it will fit in the back seat just fine.


MickH - November 4th, 2007 at 09:49 PM

Leave the tinware on and it will fit in the front boot...just get it for a "spare" Richard...:lol:


Andy - November 5th, 2007 at 10:06 PM

There's always this week end Andrew!

Bumperoo