Aussieveedubbers - Powered by GaiaBB

[WTB - WA] Oval Metal

HOODWINK - November 1st, 2007 at 11:41 AM

Hi guys,

I am looking for a few bits of metal to repair some rust in my oval, at first glance I think I need.

driver side B-pillar lower 20cm and heater channel
bottom 30cm of a W-decklid (with the internal bits)
decklid attachment points (on the body under engine vents)

does anyone know of a wreck in WA I can cut up, or can anyone in the east help?

bushed - November 1st, 2007 at 08:12 PM

I have the hing attachments u want

post plus pack plus $10

HOODWINK - November 1st, 2007 at 08:24 PM

Quote:

Originally posted by bushed
I have the hing attachments u want

post plus pack plus $10

you got a pic?

humpty - November 1st, 2007 at 10:46 PM

Might actually have some of that stuff mate.... But one question.... How much of the decklid you actually need?.... Is rusted through the "W" or is it just rusted around the seam?... Also, is the internal panel still there or is it stuffed?... The "B" pillar section is available new.... You can get it with three bolt or four bolt, with internal mounting plates or without.... The best ones are made by a guy in the UK.... Can't remember the blokes name off the top of my scone, but Fonz may know....

bushed - November 1st, 2007 at 11:45 PM

email me and I will attach piccies
cheers
click below

Turbo54 - November 2nd, 2007 at 08:05 AM

http://www.wolfparts.com/
T54

HOODWINK - November 2nd, 2007 at 09:01 AM

Quote:

Originally posted by humpty
Might actually have some of that stuff mate.... But one question.... How much of the decklid you actually need?.... Is rusted through the "W" or is it just rusted around the seam?... Also, is the internal panel still there or is it stuffed?... The "B" pillar section is available new.... You can get it with three bolt or four bolt, with internal mounting plates or without.... The best ones are made by a guy in the UK.... Can't remember the blokes name off the top of my scone, but Fonz may know....

awesome, does the guy in the uk make more than b-pillar repair sections? spose I should email fonz... I only need the seam section yes, and the internal support is pretty cactus.

cool, good news!

HOODWINK - November 2nd, 2007 at 09:03 AM

Quote:

Originally posted by Turbo54
http://www.wolfparts.com/
T54

do these guys do more than on their website? cause I need more than the bottom heater channel sections, mines GONE.

HOODWINK - November 2nd, 2007 at 09:18 AM

while I'm at it, anyone seen a headlight like this before, I need another one!

bushed - November 2nd, 2007 at 10:17 AM

'Bosch script' lense and Bosch inscribed chrome rim , bth
pretty rare

HOODWINK - November 2nd, 2007 at 10:19 AM

got one? :lol:

HOODWINK - November 2nd, 2007 at 10:42 AM

this is the uk link...

http://hookyspanelshop.com/

no b-pillars but, just A's. So I still need one?

bushed - November 2nd, 2007 at 10:44 AM

no sorry

will take a while for me to find it
any Hella lamps will be legal...got those

for the hinge parts did u want them solidhook-shaped bracket thingies that bolt to body and then hinges...thems what i have, pic soon

HOODWINK - November 2nd, 2007 at 10:51 AM

Quote:

Originally posted by bushed
no sorry

will take a while for me to find it
any Hella lamps will be legal...got those

for the hinge parts did u want them solidhook-shaped bracket thingies that bolt to body and then hinges...thems what i have, pic soon

those and the actual bit from the body that the bracket attaches to. Cut out.

bushed - November 2nd, 2007 at 10:53 AM

no body bits hoody sos, B

cheap anyway

humpty - November 2nd, 2007 at 06:31 PM

I only have one pair of those lens mate.... Rocking horse poo comes to mind.... I don't think I have another, but will ask around... And the 'script' BOSCH lens' should be legal too as they are Oz import spec... In that era, they used the same lens worldwide....
Good to see you found the Hookys Panel guy...(and sorry for the "B" bit of my last reply... I meant "A"!!) Thats the bloke I was thinking of... From what I have heard, he does the best stuff out there.... As for "B" pillar bits.... You might need to cut up a car... :sniffle: ... I dunno if late 50's, early 60's pillars are the same... Might have to check...

And lastly.... The POS fuel pump in the 60's left me broken today on Leach Hwy!!!!.... &%$&%$#!!!... I must throw that FUCKET out!!!