Board Logo

1200 single port engine
66deluxe - January 30th, 2008 at 05:52 PM

I have a single port 1200 minus alternator and ditributor, you can have it for $100, its takin up space in my shed, but you have to come pick it up, it ran before pulled from car, i am in Murrumba downs northside bris vegas 4503.

Cheers Damo.

dangerous - January 30th, 2008 at 07:02 PM

That has Das' name written all over it.

Dasdubber - January 30th, 2008 at 07:37 PM

Yeah Damo - count me in as I need something to get the oval back on the road!

Dave, and or Damo - will there be any dramas re. flywheel and starter in the later tranny I have in place? I have put later model engines into early boxes, but haven't gone the other way before!

Cheers
Al

Craig Torrens - January 30th, 2008 at 08:06 PM

Nah thats easy. Just change the starter bush back to the 6v one and fit the original 6v starter. Bushes are about $10 new.

And make sure you use the right pressure plate with the throw out bearing combo.

Dasdubber - January 30th, 2008 at 09:00 PM

Cool, thanks Craig. :tu:

66deluxe - January 30th, 2008 at 09:29 PM

Das, its yours, here when you need it.

dangerous - February 1st, 2008 at 05:16 PM

Just get yourself a 12 V flywheel Alan and clutch to suit.
I can do a 5 minute job on the lathe and it will bolt on.

Dasdubber - February 2nd, 2008 at 11:15 AM

Excellent - thanks Damo and Dave :tu:

I missed you yesterday arvo Damo whilst I was up that way but I'll be back up on the 10th Feb to get it out of your hair.

Cheers
Al