Hello all,

Putting the feelers out to see if anyone might have a set of 14" 5.5 911 Porsche Fuchs ideally with wide 5 to porsche stud adaptors. Any condition considered.

Any help much appreciated

cheers

Mike

look at the entry by Calcool

http://forums.aussieveedubbers.com/viewtopic.php?tid=68989 

http://cgi.ebay.com.au/911-porsche-fuchs-wheels_W0QQitemZ170220835925QQihZ007...

Thanks for the tips. Need some more advice. Have found adaptors from wide 5 to porsche 5x130 pcd. Need to confirm that the fuchs with adaptor will fit the rear hub of my 68 kombi without any further modification.

Have read conflicting stories on thesamba and have been told it won't fit. But have seen pics to suggest this not the case.

Anyone fitted porsche fuchs to an early bay with adaptors without any hassles?

Any help much appreciated.

Cheers
Michael

would depend on the offset of the fuchs.

Not sure of the backspace but from what I can find out the recognised offset for fuchs 14" 5.5's is 46 mm.

Thoughts ?

Cheers

Michael